Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On 02/08/2019 19:49, charles wrote:
In article , wrote: On Thursday, 16 May 2019 14:43:47 UTC+1, John Rumm wrote: On 15/05/2019 17:59, tabbypurr wrote: On Wednesday, 15 May 2019 17:33:42 UTC+1, John Rumm wrote: On 15/05/2019 13:47, Jethro_uk wrote: Conversely I am totally unsurprised. I wouldn't trust *any* consumer- grade wireless equipment. WiFi, bluetooth, proprietary zappers. None has been 100% reliable. I can see where the money goes on military kit, if they have to be 100% reliable. IME military kit is not necessarily any more reliable. All you can usually hope for is it will work at a wider temperature range, and be designed to let you hose the remains of the previous operator off it with no ill effects! Neither of those have any truth IME. And yes I did work with such kit. So your experience is limited, who knew? if by limited you mean years in the industry then yes Perhaps I need a "tongue in cheek" flag? (and the "hose off" bit on some projects is a rather grim and sad reality Sadly it can be. However I don't believe any of the equipment I worked on or with or even just saw was hoseable. - I recall one installation of several mil spec workstations in the back of a 4 tonne army truck that would be expected to operate not far behind a front line ans so was considered vulnerable to chemical and biological attack. It was designed such that you could open the drain gates, and apply a high pressure hose to the top of it. All the kit had to be IP68 or better) but a lot is not As to reliable, much depends on your definition of reliable. Yup its physically robust, and built with high reliability components, but it general is only slightly less likely (if at all) to have bugs than commercial kit. The software for it is developed, designed and documented to far higher standards than commercial kit. And its well tested, and usually far more maintainable. However it also suffers from a much smaller user base in many cases, and often relies on tool chains that have a vastly smaller user bases than more traditional desktop development tools. So it can take longer to find and fix issues than in the commercial world. It's certainly better than domestic retaill stuff, no doubt. But still long term reliability varies a lot. Engineering for reliability is not as easy as it looks. Military kits is allowed to use leaded solder ;-) Actually mandated rather than just allowed in some cases... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
need to power cycle modem remotely | UK diy | |||
OT helping elderly person with their Android tablet remotely | UK diy | |||
Initiate a phone call remotely? | UK diy | |||
Remotely Controlled Mower | UK diy | |||
Security Camera Kit Remotely Viewable over the Internet ! | Electronics Repair |