Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
curtains with PVCu windows
My curtain rails are all fixed to the wooden top of the window frames. If I replace the windows with PVCu, what is the best way to fix the curtain rails ?
I know you can screw into PVCu, but the screws tend to work loose over time. A neighbour had the same issue and I did a quick fix for him putting battens on the ceiling, but it was only a temporary bodge - he probably kept it though ! Thanks, Simon. |
#2
Posted to uk.d-i-y
|
|||
|
|||
curtains with PVCu windows
On 02/05/2018 13:28, sm_jamieson wrote:
My curtain rails are all fixed to the wooden top of the window frames. If I replace the windows with PVCu, what is the best way to fix the curtain rails ? I know you can screw into PVCu, but the screws tend to work loose over time. A neighbour had the same issue and I did a quick fix for him putting battens on the ceiling, but it was only a temporary bodge - he probably kept it though ! Thanks, Simon. Fit a batten along the top of gthe wall above the window and fit your curtain tracks to that, or the 'modern' way seems to be to use a metal pole attached at either end just beyond where the lintel would stop and the curtains all have metal rings fitted the slide along the pole. Or do your windows go right up to the ceiling ?. In which case a picture would help. |
#3
Posted to uk.d-i-y
|
|||
|
|||
curtains with PVCu windows
On 02/05/2018 20:00, Andrew wrote:
On 02/05/2018 13:28, sm_jamieson wrote: My curtain rails are all fixed to the wooden top of the window frames. If I replace the windows with PVCu, what is the best way to fix the curtain rails ? I know you can screw into PVCu, but the screws tend to work loose over time. A neighbour had the same issue and I did a quick fix for him putting battens on the ceiling, but it was only a temporary bodge - he probably kept it though ! Thanks, Simon. Fit a batten along the top of gthe wall above the window and fit your curtain tracks to that, or the 'modern' way seems to be to use a metal pole attached at either end just beyond where the lintel would stop and the curtains all have metal rings fitted the slide along the pole. I had that and the screws kept pulling out due to a section of wall at each end that was seemingly made of cheese. I no longer have any problems since I shortened the pole slightly ... and screwed it straight into the Catnic! It's never going anywhere now. SteveW |
#4
Posted to uk.d-i-y
|
|||
|
|||
curtains with PVCu windows
On 02/05/2018 21:20, Steve Walker wrote:
On 02/05/2018 20:00, Andrew wrote: On 02/05/2018 13:28, sm_jamieson wrote: My curtain rails are all fixed to the wooden top of the window frames. If I replace the windows with PVCu, what is the best way to fix the curtain rails ? I know you can screw into PVCu, but the screws tend to work loose over time. A neighbour had the same issue and I did a quick fix for him putting battens on the ceiling, but it was only a temporary bodge - he probably kept it though ! Thanks, Simon. Fit a batten along the top of gthe wall above the window and fit your curtain tracks to that, or the 'modern' way seems to be to use a metal pole attached at either end just beyond where the lintel would stop and the curtains all have metal rings fitted the slide along the pole. I had that and the screws kept pulling out due to a section of wall at each end that was seemingly made of cheese. I no longer have any problems since I shortened the pole slightly ... and screwed it straight into the Catnic! It's never going anywhere now. SteveW But interstitial condensation could have a nasty effect on your lintel unless you squirted some spray-grease into the hole to protect it. |
#5
Posted to uk.d-i-y
|
|||
|
|||
curtains with PVCu windows
We have curtains for tracks, so cannot use a pole - would need all new curtains !
There is a space above the window. Not sure what is behind it. Could be the back of the concrete (estate agent "stone" !) lintel if it goes full depth. Also someone pointed out that double glazing handles often stick out a bit, so might be an idea to fix to the ceiling a bit further out. Simon. |
#6
Posted to uk.d-i-y
|
|||
|
|||
curtains with PVCu windows
Andrew Wrote in message:
On 02/05/2018 21:20, Steve Walker wrote: On 02/05/2018 20:00, Andrew wrote: On 02/05/2018 13:28, sm_jamieson wrote: My curtain rails are all fixed to the wooden top of the window frames. If I replace the windows with PVCu, what is the best way to fix the curtain rails ? I know you can screw into PVCu, but the screws tend to work loose over time. A neighbour had the same issue and I did a quick fix for him putting battens on the ceiling, but it was only a temporary bodge - he probably kept it though ! Thanks, Simon. Fit a batten along the top of gthe wall above the window and fit your curtain tracks to that, or the 'modern' way seems to be to use a metal pole attached at either end just beyond where the lintel would stop and the curtains all have metal rings fitted the slide along the pole. I had that and the screws kept pulling out due to a section of wall at each end that was seemingly made of cheese. I no longer have any problems since I shortened the pole slightly ... and screwed it straight into the Catnic! It's never going anywhere now. SteveW But interstitial condensation could have a nasty effect on your lintel unless you squirted some spray-grease into the hole to protect it. I expect the hole is full of the screw... how's this vapour going to get past any quicker than through the rest of the plasterboard? -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#7
Posted to uk.d-i-y
|
|||
|
|||
curtains with PVCu windows
On 03/05/2018 16:52, Jim K wrote:
Andrew Wrote in message: On 02/05/2018 21:20, Steve Walker wrote: On 02/05/2018 20:00, Andrew wrote: On 02/05/2018 13:28, sm_jamieson wrote: My curtain rails are all fixed to the wooden top of the window frames. If I replace the windows with PVCu, what is the best way to fix the curtain rails ? I know you can screw into PVCu, but the screws tend to work loose over time. A neighbour had the same issue and I did a quick fix for him putting battens on the ceiling, but it was only a temporary bodge - he probably kept it though ! Thanks, Simon. Fit a batten along the top of gthe wall above the window and fit your curtain tracks to that, or the 'modern' way seems to be to use a metal pole attached at either end just beyond where the lintel would stop and the curtains all have metal rings fitted the slide along the pole. I had that and the screws kept pulling out due to a section of wall at each end that was seemingly made of cheese. I no longer have any problems since I shortened the pole slightly ... and screwed it straight into the Catnic! It's never going anywhere now. SteveW But interstitial condensation could have a nasty effect on your lintel unless you squirted some spray-grease into the hole to protect it. I expect the hole is full of the screw... how's this vapour going to get past any quicker than through the rest of the plasterboard? You really don't understand physics do you. Unless the plasterboard is foil-backed and the joints sealed with double sided tape and masticed all round the perimeter, water vapour will migrate through plasterboard and condense on any cold surface. There are plenty of calculators on places like British Gypsum, Celotex etc web sites where you can input your construction and it will predict the likelyhood of interstitial condensation. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
glazing PVCu windows | UK diy | |||
good quality PVCu french doors (aka windows !) | UK diy | |||
Buying second-hand PVCu french doors | UK diy | |||
screwfix PVCu doors / windows - actual size ? | UK diy | |||
New PVCu windows ...? | UK diy |