On 02/05/2018 20:00, Andrew wrote:
On 02/05/2018 13:28, sm_jamieson wrote:
My curtain rails are all fixed to the wooden top of the window frames.
If I replace the windows with PVCu, what is the best way to fix the
curtain rails ?
I know you can screw into PVCu, but the screws tend to work loose over
time.
A neighbour had the same issue and I did a quick fix for him putting
battens on the ceiling, but it was only a temporary bodge - he
probably kept it though !
Thanks,
Simon.


Fit a batten along the top of gthe wall above the window and fit
your curtain tracks to that, or the 'modern' way seems to be
to use a metal pole attached at either end just beyond where the
lintel would stop and the curtains all have metal rings fitted
the slide along the pole.

I had that and the screws kept pulling out due to a section of wall at
each end that was seemingly made of cheese.

I no longer have any problems since I shortened the pole slightly ...
and screwed it straight into the Catnic! It's never going anywhere now.

SteveW