Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Well that makes it clear...
Fitting some shingles on a roof, I though I would check the instructions
on the package... Not sure they helped much - here is what they said: "You can guarantee necessary roof temperatures and humidity's mode only in case, construction has solid steam isolation, heat isolation of necessary width, chosen, according to area wind isolation and ventilation chamber beneath the roof. You cannot cover the same roof with production, having codes of different colours different production dates. Minor difference of tile colour is not considered as defect, it is typical to any producer's flexible tiles. To reduce colour difference marginally, it is recommended to mix tiles from 5-6 packages in time of paving. Paving must be performed by diagonal lines. If roof paving works are being performed when temperature is not high, it is necessary to heat sticky bottom side of tiles, using industrial fan. Seeking to avoid roof's damaging, you should cut materials on special board while paving. Production palettes cannot be stored on each other. Jo avoid tile grip in Package, it is necessary to protect them from direct sunbeam. On purpose to separate tiles in package from each other, you should bend package a little and shake it. It is not recommended to walk on roof when it is hot sunny weather, because you can damage covering. Special ladders must be used." -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#2
Posted to uk.d-i-y
|
|||
|
|||
Well that makes it clear...
On 9/10/2016 8:36 PM, John Rumm wrote:
Fitting some shingles on a roof, I though I would check the instructions on the package... Not sure they helped much - here is what they said: "You can guarantee necessary roof temperatures and humidity's mode only in case, construction has solid steam isolation, heat isolation of necessary width, chosen, according to area wind isolation and ventilation chamber beneath the roof. You cannot cover the same roof with production, having codes of different colours different production dates. Minor difference of tile colour is not considered as defect, it is typical to any producer's flexible tiles. To reduce colour difference marginally, it is recommended to mix tiles from 5-6 packages in time of paving. Paving must be performed by diagonal lines. If roof paving works are being performed when temperature is not high, it is necessary to heat sticky bottom side of tiles, using industrial fan. Seeking to avoid roof's damaging, you should cut materials on special board while paving. Production palettes cannot be stored on each other. Jo avoid tile grip in Package, it is necessary to protect them from direct sunbeam. On purpose to separate tiles in package from each other, you should bend package a little and shake it. It is not recommended to walk on roof when it is hot sunny weather, because you can damage covering. Special ladders must be used." Chinglish is an interesting language, isn't it? |
#3
Posted to uk.d-i-y
|
|||
|
|||
Well that makes it clear...
|
#4
Posted to uk.d-i-y
|
|||
|
|||
Well that makes it clear...
On Sunday, 11 September 2016 01:36:12 UTC+1, John Rumm wrote:
Fitting some shingles on a roof, I though I would check the instructions on the package... Not sure they helped much - here is what they said: "You can guarantee necessary roof temperatures and humidity's mode only in case, construction has solid steam isolation, heat isolation of necessary width, chosen, according to area wind isolation and ventilation chamber beneath the roof. You cannot cover the same roof with production, having codes of different colours different production dates. Minor difference of tile colour is not considered as defect, it is typical to any producer's flexible tiles. To reduce colour difference marginally, it is recommended to mix tiles from 5-6 packages in time of paving. Paving must be performed by diagonal lines. If roof paving works are being performed when temperature is not high, it is necessary to heat sticky bottom side of tiles, using industrial fan. Seeking to avoid roof's damaging, you should cut materials on special board while paving. Production palettes cannot be stored on each other. Jo avoid tile grip in Package, it is necessary to protect them from direct sunbeam. So don't drive over them in your Sunbeam, seems clear enough. If you take enough illegal substances. NT |
#6
Posted to uk.d-i-y
|
|||
|
|||
Well that makes it clear...
Some years ago we used to get this kind of stuff from Japan, but more
recently everyone seems to have gone for the pictorial approach of instructions, usually containing a little oriental bloke doing things with little icons and crossed out bits to signify what not or what to do. Most people I talk to find these just as impossible to understand as the old wordy descriptions were Things like care has to be, with loopstick wall to avoid crack. This translated to on a radio with a ferrite rod out the back on a swivel to do not extend it and shove it against a wall or it may get broken. Pioneer were responsible for that and no doubt many others. Brian-- ----- - This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please! "Graham." wrote in message ... Wrote in message: On Sunday, 11 September 2016 01:36:12 UTC+1, John Rumm wrote: Fitting some shingles on a roof, I though I would check the instructions on the package... Not sure they helped much - here is what they said: "You can guarantee necessary roof temperatures and humidity's mode only in case, construction has solid steam isolation, heat isolation of necessary width, chosen, according to area wind isolation and ventilation chamber beneath the roof. You cannot cover the same roof with production, having codes of different colours different production dates. Minor difference of tile colour is not considered as defect, it is typical to any producer's flexible tiles. To reduce colour difference marginally, it is recommended to mix tiles from 5-6 packages in time of paving. Paving must be performed by diagonal lines. If roof paving works are being performed when temperature is not high, it is necessary to heat sticky bottom side of tiles, using industrial fan. Seeking to avoid roof's damaging, you should cut materials on special board while paving. Production palettes cannot be stored on each other. Jo avoid tile grip in Package, it is necessary to protect them from direct sunbeam. So don't drive over them in your Sunbeam, seems clear enough. If you take enough illegal substances. NT And watch what you do with your sticky bottom. -- %Profound_observation% ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#7
Posted to uk.d-i-y
|
|||
|
|||
Well that makes it clear...
Hang on, then these are roofing materials not suitable for sunny days?
How odd. Do they also sell the special ladders? Brian -- ----- - This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please! "John Rumm" wrote in message o.uk... Fitting some shingles on a roof, I though I would check the instructions on the package... Not sure they helped much - here is what they said: "You can guarantee necessary roof temperatures and humidity's mode only in case, construction has solid steam isolation, heat isolation of necessary width, chosen, according to area wind isolation and ventilation chamber beneath the roof. You cannot cover the same roof with production, having codes of different colours different production dates. Minor difference of tile colour is not considered as defect, it is typical to any producer's flexible tiles. To reduce colour difference marginally, it is recommended to mix tiles from 5-6 packages in time of paving. Paving must be performed by diagonal lines. If roof paving works are being performed when temperature is not high, it is necessary to heat sticky bottom side of tiles, using industrial fan. Seeking to avoid roof's damaging, you should cut materials on special board while paving. Production palettes cannot be stored on each other. Jo avoid tile grip in Package, it is necessary to protect them from direct sunbeam. On purpose to separate tiles in package from each other, you should bend package a little and shake it. It is not recommended to walk on roof when it is hot sunny weather, because you can damage covering. Special ladders must be used." -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#8
Posted to uk.d-i-y
|
|||
|
|||
Well that makes it clear...
On 11-Sep-16 10:23 AM, Brian Gaff wrote:
Hang on, then these are roofing materials not suitable for sunny days? How odd. Do they also sell the special ladders? Brian Plastic shingles, maybe? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Walmart won't makes Confederate flag cake but makes ISIS flag cake | Home Repair | |||
When Michael Terrell makes his own hat, it makes the news.... | Electronics Repair | |||
Sorry I'm not being clear about this!! | Electronics Repair | |||
Ozone generator to clear mold, will it clear termites too? | Home Ownership | |||
draining CH after Fernox Restorer - how clear is clear? | UK diy |