Fitting some shingles on a roof, I though I would check the instructions
on the package...

Not sure they helped much - here is what they said:


"You can guarantee necessary roof temperatures and humidity's mode only
in case, construction has solid steam isolation, heat isolation of
necessary width, chosen, according to area wind isolation and
ventilation chamber beneath the roof.

You cannot cover the same roof with production, having codes of
different colours different production dates. Minor difference of tile
colour is not considered as defect, it is typical to any producer's
flexible tiles. To reduce colour difference marginally, it is
recommended to mix tiles from 5-6 packages in time of paving. Paving
must be performed by diagonal lines.

If roof paving works are being performed when temperature is not high,
it is necessary to heat sticky bottom side of tiles, using industrial fan.

Seeking to avoid roof's damaging, you should cut materials on special
board while paving.

Production palettes cannot be stored on each other. Jo avoid tile grip
in Package, it is necessary to protect them from direct sunbeam.

On purpose to separate tiles in package from each other, you should bend
package a little and shake it. It is not recommended to walk on roof
when it is hot sunny weather, because you can damage covering. Special
ladders must be used."



--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/