UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 46
Default Off-mains water tank and half inch class C black (alkathene?) pipe questions

The black half inch class C pipe which feeds into the concrete water holding tank in garden started leaking where it screws on, as the ground shifted and the pipe got pulled out of the connector.

The mess you see in the photo ( http://i67.tinypic.com/bg61eh.jpg ) is half a day's digging through stone, mud and water to get to the pipe, which I managed to cap off via a connector and short length of garden hose (to top up with manually for the time being).

There was no way of shutting off the pipe before, so float valve servicing was a job for a pair of goggles, freezing hands, and lots of spare split-pins and swearing! Now I've got access to the pipe, I'd like to:

* Install a box for the connection to live in for easy access including a stop valve
* Tee off a standpipe for a garden hose
* Not have to replace the current copper threaded fitting which is embedded in the side of the tank.

Additionally, the tank is fed via a tee from local farmers trough feed, which in turn comes from a spring catchment which runs into a large holding tank on a hill which serves several properties. When there's been heavy (or little) rain, the water gets silty, and every 2 years I clean out about 4 inches of silt from the bottom of the tank and then jetwash and flush the whole system with a few drops of hydrochloric acid.

Sometimes, some of the silt doesn't get time to settle, and despite the take-off pipe being about a foot off the bottom of the tank, particles then gets pumped up to the header tank in the roof, so I have to clean that and the toilet cisterns out from time to time.

There's a fine particulate filter for the kitchen tap but I think that putting one of these inline before the outside tank would just clog up quickly .. I've "googled it" but I just have so many options, many way beyond my budget. I'm a self-employed single parent financially recovering from the summer holidays, can't afford the plumber's quotes but have basic plumbing skills - what are my options, preferably keeping the whole lot under £200 max?

Thank you!

(side notes before anyone gets alarmed: yes, this is drinking water, but we've got a fine particulate filter and UV on the kitchen tap, only use it for tea and coffee, and have big refillable bottles to make cold drinks from in the kitchen. And it (just) passes the occasional mandatory local council test).
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What bore is alkathene pipe? Dave UK diy 13 January 24th 18 11:18 AM
continuing knocking sound in water pipe half an hour after all water off [email protected] Home Repair 8 December 17th 08 07:37 PM
length of threads on 1 inch black pipe? and reamer usage 2doglegdave Metalworking 1 January 3rd 08 09:15 AM
Water tank only heating half the contents [email protected] UK diy 1 March 7th 06 08:43 PM
Cutting/sawing a hot water tank in half. Steve56A Home Repair 15 December 2nd 04 10:29 PM


All times are GMT +1. The time now is 08:13 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"