 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Crimp without crimp tool ?
On 03/05/2013 09:30, The Other Mike wrote:
AS mentioned above - I can do without the flexability .. no really needed at this end of the cct. Soldering, if done correctly, hardly affects the cable My concern is the amount of heat will cause damage to the PVC insulation ... PVC and a blowtorch is not a good mix. I do have plenty of solder and flux ... maybe I will have to go this way. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Crimp, solder, both? | UK diy | |||
| What to use as crimp tool? - HowToCrimp.pdf | Electronic Schematics | |||
| Where can I find this crimp tool? | UK diy | |||
| Remove crimp from PEX? | Home Repair | |||
| Pex crimp tools | Home Repair | |||
![Rick Hughes[_5_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Hybrid Mode
