Can any kind soul point me to a supplier of drawer packs. Have seen the B&Q
but they all seem to be of the variety where the drawer sides are short (ie.
the inside depth)
I'm building some units and could do without the extra work drawers create,
however this means I can be a little flexible on dimentions.
Many thanks

P

Peter wrote:

Can any kind soul point me to a supplier of drawer packs. Have seen the B&Q
but they all seem to be of the variety where the drawer sides are short (ie.
the inside depth)
I'm building some units and could do without the extra work drawers create,
however this means I can be a little flexible on dimentions.
Many thanks

Try he
http://www.woodfit.com/index.php?cPath=119 I've only bought hinges and
drawer slides from them. Pleased with both, service etc.

Peter
No relations with the company.

--
Add my middle initial to email me. It has become attached to a country
www.the-brights.net

On 2007-05-31 22:25:13 +0100, (Peter Ashby) said:

Peter wrote:

Can any kind soul point me to a supplier of drawer packs. Have seen the B&Q
but they all seem to be of the variety where the drawer sides are short (ie.
the inside depth)
I'm building some units and could do without the extra work drawers create,
however this means I can be a little flexible on dimentions.
Many thanks

Try he
http://www.woodfit.com/index.php?cPath=119 I've only bought hinges and
drawer slides from them. Pleased with both, service etc.

Peter
No relations with the company.

A lot of these items are made by Blum, who in general have quite good products.

Another good source of supply of these and similar items is Isaac Lord
in High Wycombe. This is a trade counter and internet supplier.
Usefully, they will also order items from Haefele (another goldmine)
but who only sell to dealers.

Peter Ashby wrote:
Peter wrote:

Can any kind soul point me to a supplier of drawer packs. Have seen the B&Q
but they all seem to be of the variety where the drawer sides are short (ie.
the inside depth)
I'm building some units and could do without the extra work drawers create,
however this means I can be a little flexible on dimentions.
Many thanks

Try he
http://www.woodfit.com/index.php?cPath=119 I've only bought hinges and
drawer slides from them. Pleased with both, service etc.

Yes I've used drawer kits from them; they were very good. Although I
don't see mine in the above link. Mine were plastic, and you bought the
sides/back (built-in groove) in standard lengths which you cut to
length, and joined together with corner connecters, so you could vary
width and depth infinitely.

David

In article ,
Lobster wrote:
Yes I've used drawer kits from them; they were very good. Although I
don't see mine in the above link. Mine were plastic, and you bought the
sides/back (built-in groove) in standard lengths which you cut to
length, and joined together with corner connecters, so you could vary
width and depth infinitely.

Pretty horrible things, though. If you don't provide a back stop the
fronts come loose. Most prefer roller runners these days too for where you
might use these.

--
*Learn from your parents' mistakes - use birth control

Dave Plowman London SW
To e-mail, change noise into sound.