We have an asphalt path from our door to our driveway, with 2 short steps.
These steps have an edging that is a couple of centimetres higher than the
asphalt, and my wife had a nasty fall on the edging yesterday. In the long
run we should take the steps out and turn it into a sloping path (it's
about a 20 cm drop in all over 4 meters or so), but can we just even it up
with asphalt or is that too thin to actually adhere?

Thanks
Doug
--
Doug Weller --
A Director and Moderator of The Hall of Ma'at http://www.hallofmaat.com
Doug's Archaeology Site: http://www.ramtops.co.uk
Amun - co-owner/co-moderator http://groups.yahoo.com/group/Amun/

On Wed, 09 May 2007 20:46:42 +0100, Doug Weller wrote:

We have an asphalt path from our door to our driveway, with 2 short steps.
These steps have an edging that is a couple of centimetres higher than the
asphalt, and my wife had a nasty fall on the edging yesterday. In the long
run we should take the steps out and turn it into a sloping path (it's
about a 20 cm drop in all over 4 meters or so), but can we just even it up
with asphalt or is that too thin to actually adhere?

Thanks
Doug

===================================
For such a small area you could use bagged tarmac from B&Q etc. You could
use it direct from the bag (suitably warmed) or use a bonding agent
(probably need a builders' merchant for this) to help it adhere. It won't
be an ideal solution but it will be adequate for pedestrian traffic. It
will need to be at least 1" thick but more will be better. Rake it out to
required thickness and roll well with a garden roller or tamp it with a
heavy steel tamper. One half of an Acrow prop will do as a tamper if you
happen to have one lying around. Wipe the roller or tamper frequently with
a parafin soaked rag to prevent sticking.

cic.

--
===================================
Using Ubuntu Linux
Windows shown the door
===================================

On Wed, 09 May 2007 21:26:13 GMT, in uk.d-i-y, Cicero wrote:

On Wed, 09 May 2007 20:46:42 +0100, Doug Weller wrote:

We have an asphalt path from our door to our driveway, with 2 short steps.
These steps have an edging that is a couple of centimetres higher than the
asphalt, and my wife had a nasty fall on the edging yesterday. In the long
run we should take the steps out and turn it into a sloping path (it's
about a 20 cm drop in all over 4 meters or so), but can we just even it up
with asphalt or is that too thin to actually adhere?

Thanks
Doug

===================================
For such a small area you could use bagged tarmac from B&Q etc. You could
use it direct from the bag (suitably warmed) or use a bonding agent
(probably need a builders' merchant for this) to help it adhere. It won't
be an ideal solution but it will be adequate for pedestrian traffic. It
will need to be at least 1" thick but more will be better. Rake it out to
required thickness and roll well with a garden roller or tamp it with a
heavy steel tamper. One half of an Acrow prop will do as a tamper if you
happen to have one lying around. Wipe the roller or tamper frequently with
a parafin soaked rag to prevent sticking.


Thanks. I think you've put me off. :-)
I'd really like to have the whole path rebuilt as a sloping path. Although
then with ice...

Doug
--
Doug Weller --
A Director and Moderator of The Hall of Ma'at http://www.hallofmaat.com
Doug's Archaeology Site: http://www.ramtops.co.uk
Amun - co-owner/co-moderator http://groups.yahoo.com/group/Amun/

On Thu, 10 May 2007 21:07:38 +0100, Doug Weller wrote:

On Wed, 09 May 2007 21:26:13 GMT, in uk.d-i-y, Cicero wrote:

On Wed, 09 May 2007 20:46:42 +0100, Doug Weller wrote:

We have an asphalt path from our door to our driveway, with 2 short
steps. These steps have an edging that is a couple of centimetres
higher than the asphalt, and my wife had a nasty fall on the edging
yesterday. In the long run we should take the steps out and turn it
into a sloping path (it's about a 20 cm drop in all over 4 meters or
so), but can we just even it up with asphalt or is that too thin to
actually adhere?

Thanks
Doug

===================================
For such a small area you could use bagged tarmac from B&Q etc. You could
use it direct from the bag (suitably warmed) or use a bonding agent
(probably need a builders' merchant for this) to help it adhere. It won't
be an ideal solution but it will be adequate for pedestrian traffic. It
will need to be at least 1" thick but more will be better. Rake it out to
required thickness and roll well with a garden roller or tamp it with a
heavy steel tamper. One half of an Acrow prop will do as a tamper if you
happen to have one lying around. Wipe the roller or tamper frequently
with a parafin soaked rag to prevent sticking.


Thanks. I think you've put me off. :-) I'd really like to have the whole
path rebuilt as a sloping path. Although then with ice...

Doug

==================================
Well, you asked for it! Seriously though, a concrete path with a ribbed
surface in a herringbone pattern is the probably the best way to get a
safe and durable path. The herringbone pattern will ensure that water
drains away before it has a chance to freeze.

If you're not already aware of it, have a look here for some ideas:

www.pavingexpert.com/home.htm

This is generally regarded as the bible for all kinds of surfacing.

Cic.

--
===================================
Using Ubuntu Linux
Windows shown the door
===================================

Cicero wrote:

www.pavingexpert.com/home.htm

This is generally regarded as the bible for all kinds of surfacing.

By who exactly?

On Thu, 10 May 2007 22:30:46 +0100, Bypass wrote:

Cicero wrote:

www.pavingexpert.com/home.htm

This is generally regarded as the bible for all kinds of surfacing.

-------------------------------------
By who exactly?

-------------------------------------
I don't know by whom *exactly*.

I notice that it is frequently quoted and recommended by posters to this
DIY group and I have never seen any criticism of it so that suggests to me
that the advice it provides is reasonably good, professional and accurate.

If you have doubts about the site (with which I have no connection) then
this group is a good place to express those doubts in the interests of
keeping this group well-informed. That's why groups like this exist - to
provide a forum for all shades of opinion.

I believe that the site itself also invites constructive criticism so you
might contact its authors to question their expertise and advice. I'm sure
they would welcome any contribution you might make to help them improve
their site.

Cic.



--
===================================
Using Ubuntu Linux
Windows shown the door
===================================