Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
I'm about to tile the bathroom but am unsure about where to centre the
tiles on the long wall against which the bath is placed. The short wall at the tap end of the bath has a window in it. The opening into which the window is fixed has the usual step into it at its bottom and top and on one side. The other side has the long bath wall running straight into it. In other words, if you look towards the tap end of the bath there is wall facing you above and below the window, and to the right of it. There is no wall facing you on the left. Long winded/convoluted description over, where do I centre the long wall tiles? Half way between the wall at the non-tap end and the wall just below the window, or half way from the non-tap end wall and the window frame? TIA -- Frank (Beware of spam trap - remove the negative) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Aldi Mobile Work Centre | UK diy | |||
Kel Centre Saver | Woodturning | |||
FA: smallish centre lathe | Metalworking | |||
Condenser Fitted into centre of house | UK diy | |||
Cabinet Design Centre v7.0 - Cubit | UK diy |