About Us

Phil L

wrote:
Hello,

The cold tap to our bath has stopped working. The header tank has one
pipe coming from it which splits, via a T-piece, into two. One pipe
from this goes to the cylinder to be heated and the hot water tap
flows without problems. The second pipe goes to the cold water tap.

Water flows freely from the loft down the pipe to the airing cupboard
where there is a gate valve and the blockage is somewhere between the
gate valve and the bath. I know this because I have taken the gate
valve apart and the water is running up to that point and I have
taken the tap apart and there is no water going to it.

So what's the best thing to do now? Should I use some curtain wire to
try and move the blockage? Or is there a better way? Any idea what
might be blocking it?

Thanks.

Uncouple the gate valve and turn on the cold tap to the bath, blow down the
gate valve end, there's probably a dead mouse or some such stuck in the
pipe, probably at the bath tap.
don't suck.

The Natural Philosopher

Phil L wrote:
wrote:
Hello,

The cold tap to our bath has stopped working. The header tank has one
pipe coming from it which splits, via a T-piece, into two. One pipe
from this goes to the cylinder to be heated and the hot water tap
flows without problems. The second pipe goes to the cold water tap.

Water flows freely from the loft down the pipe to the airing cupboard
where there is a gate valve and the blockage is somewhere between the
gate valve and the bath. I know this because I have taken the gate
valve apart and the water is running up to that point and I have
taken the tap apart and there is no water going to it.

So what's the best thing to do now? Should I use some curtain wire to
try and move the blockage? Or is there a better way? Any idea what
might be blocking it?

Thanks.

Uncouple the gate valve and turn on the cold tap to the bath, blow down the
gate valve end, there's probably a dead mouse or some such stuck in the
pipe, probably at the bath tap.
don't suck.

Could also be an airlock if the pipe has a high point between the valave
and teh bath tap.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plumbing Code - Can I tie my bathroom exaust fan into the main plumbing vent to the outside.	johnnymo	Home Repair	29	December 9th 18 02:08 AM
Lamp post emergency	Melissa	Home Repair	23	January 29th 06 03:02 PM
Need Emergency Help With Plans	J T	Woodworking	14	February 23rd 05 04:49 PM
emergency lights	Charlie Self	Woodworking	18	November 21st 04 09:51 AM
CH/HW emergency - Help !!	Dave Liquorice	UK diy	8	July 30th 03 08:59 AM

Menu

About Us