UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2
Default Wiring a light to a socket

Hi,

I've just had a shed built and the builder has run the lighting for the
shed off the power circuit that
he fed in there. The power circuit looks fine - essentially an
extension of the power circuit in the utility room. The shed has been
built onto the utility room.

I expressed concern, but the builder has assured me that it is
perfectly fine to power a light off a power circuit. Is he right?

many thanks in advance.

  #2   Report Post  
Posted to uk.d-i-y
Geo Geo is offline
external usenet poster
 
Posts: 27
Default Wiring a light to a socket

On 21 Nov 2006 09:54:26 -0800, "JavaEnquirer"
wrote:


I've just had a shed built and the builder has run the lighting for the
shed off the power circuit that
he fed in there. The power circuit looks fine - essentially an
extension of the power circuit in the utility room. The shed has been
built onto the utility room.

I expressed concern, but the builder has assured me that it is
perfectly fine to power a light off a power circuit. Is he right?


Possibly no problem for him electricky-wise - but if your electric tool slips,
does you some damage and trips the breaker you will be left in the dark...

Geo
  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9,045
Default Wiring a light to a socket

JavaEnquirer wrote:
Hi,

I've just had a shed built and the builder has run the lighting for the
shed off the power circuit that
he fed in there. The power circuit looks fine - essentially an
extension of the power circuit in the utility room. The shed has been
built onto the utility room.

I expressed concern, but the builder has assured me that it is
perfectly fine to power a light off a power circuit. Is he right?

many thanks in advance.

Well if it isn't I'd better unplug all my desk lamps and the like...

I think the issue with lighting circuits being 'done different' is that
the loads are fairly predictable, and the requirements for safety are
somewhat less than a ring main. Hence light duty cable ad 6A fused
radial not ring..
  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,120
Default Wiring a light to a socket

The message om
from "JavaEnquirer" contains these words:

I expressed concern, but the builder has assured me that it is
perfectly fine to power a light off a power circuit. Is he right?


Yes, provided it's taken through a fused wossname as the 6A cable for
the lighting circuit won't be sufficiently protected by whatever's
protecting the socket circuit.

--
Skipweasel
Pay no attention to that man behind the curtain.
  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 3,356
Default Wiring a light to a socket

On 21 Nov 2006 09:54:26 -0800 someone who may be "JavaEnquirer"
wrote this:-

I expressed concern, but the builder has assured me that it is
perfectly fine to power a light off a power circuit. Is he right?


Yes and no.

Without looking up the precise details, if the circuit that supplies
the sockets has a protective device rated at more than ISTR 16A then
some types of lamp holder cannot be used (and if you have some types
of lamp holder it must be less than that).

The cabling to the light should be protected by a suitable
protective device, usually a fused connection unit from which the
lighting is taken.

If the shed is used for more than just lobbing the lawnmower in then
the power supply should be direct from your consumer unit, with a
small consumer unit in the shed for lighting, socket outlets and
whatever. This is to try and avoid you plunging yourself into
darkness when you drill through a cable.


--
David Hansen, Edinburgh
I will *always* explain revoked encryption keys, unless RIP prevents me
http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54


  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9,560
Default Wiring a light to a socket

JavaEnquirer wrote:

Hi,

I've just had a shed built and the builder has run the lighting for the
shed off the power circuit that
he fed in there. The power circuit looks fine - essentially an
extension of the power circuit in the utility room. The shed has been
built onto the utility room.

I expressed concern, but the builder has assured me that it is
perfectly fine to power a light off a power circuit. Is he right?

many thanks in advance.


For storage space only it doesnt matter, but if youre likely to use
power tools there I would object, as you'll be plunged into farkness
the moment your tool develops a dangerous fault, and is doing 20,000
rpm.

PS what is farkness? Well, its like darkness only far darker. Its when
you really can not see a single thing anywhere. Unlike ordinary
darkness, when there are lights on in other rooms and you can see just
about.


NT

  #7   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 200
Default Wiring a light to a socket


wrote


PS what is farkness? Well, its like darkness only far darker. Its when
you really can not see a single thing anywhere. Unlike ordinary
darkness, when there are lights on in other rooms and you can see just
about.


And where the exclamation "oh farking hell" may be frequently heard?

H


  #8   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 402
Default Wiring a light to a socket

HLAH wrote:

[...] where the exclamation "oh farking hell" may be frequently heard?


At Highgrove House, I would imagine.

--
Andy
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coaxial tv socket wiring Kroma UK diy 18 October 30th 05 10:11 AM
New Outside Socket and Security Light [email protected] UK diy 3 June 29th 05 06:44 PM
Wiring an aerial socket Jim UK diy 4 April 1st 05 01:02 AM
phone socket wiring Phil McCavity UK diy 7 February 19th 05 02:07 PM
Light Socket Wiring Query L Reid UK diy 6 December 11th 03 10:36 AM


All times are GMT +1. The time now is 11:05 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"