Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
Hi All,
At my secret headquarters, I have a couple of bell boxes similar to this http://cgi.ebay.co.uk/External-Alarm...QQcmdZViewItem but the horizontal design. They were looking a bit tired so I decided to take them down and paint them and make up some new signage for them with my table top publishing system and laminator, and possibly add a flashing led if I can be bothered to wire up an LV supply to them. I have given one of them a few coats of car type (cellulose??) primer and then a top coat, but whtether due to the paint being old stock, or my ineptitude with a spray can, the result isn't brilliant. I wondered about going out to buy a new can of top coat, but then thought by the time i'd done that and bought another can of primer for the second box, I could probably have bought a more modern looking bell box. I had a look on ebay, but most of them seem to be going for silly money. So, to the questions............ Firstly, is any self respecting theif going to be frightened off by the sight of an old style bell box, or do I need to re -invest in something more sexy? If the latter, does anyone know a good source of these? Cheers |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Home Made UHF 50 Ohm Dummy Load | Electronics Repair | |||
Wirefree bell push to wired bell | UK diy | |||
Bell cranks | Metalworking | |||
Need to modify door bell | Home Repair | |||
Alarm Bell Box wiring | UK diy |