UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 10th 06, 06:51 PM posted to uk.d-i-y
 
Posts: n/a
Default My ALDI router does not fit the table ! ARGHH help

I just tried to connect the ALDI router and table that I brough end of
last year.

Someone suggested it in this group.


I have just tried to put it together, and the router does not fit the
table. The table has a circular cutout , but the router is not a round
it looks more like
__
(___)

rather than
( )


Did anyone else here buy one ?


  #9   Report Post  
Old February 10th 06, 09:10 PM posted to uk.d-i-y
The3rd Earl Of Derby
 
Posts: n/a
Default My ALDI router does not fit the table ! ARGHH help

Andy Hall wrote:
On Fri, 10 Feb 2006 20:03:46 GMT, "The3rd Earl Of Derby"
wrote:

Andy Hall wrote:
On Fri, 10 Feb 2006 19:01:05 GMT, Tony Bryer
wrote:

On 10 Feb 2006 10:51:06 -0800 wrote :
I just tried to connect the ALDI router and table that I
brough end of last year.

Someone suggested it in this group.

I have just tried to put it together, and the router does not
fit the table. The table has a circular cutout , but the router
is not a round it looks more like

Don't tell Andy Hall but I've got a Power Devil router and Aldi
router table and both work well together.

The router base is like
a circle with two bits cut off. The recess in the table in a
circle of similar diameter. You just rotate the router base to
best align with the clamps.

Another option might be a Trend Unibase cost about 13.

http://www.trendmachinery.co.uk/unibase/


No chance thats bigger than the hole in the table.

Yes I have the same table.


Shame.


It is for him, my router fits its a Trendy router. ;-)

--
Sir Benjamin Middlethwaite


  #10   Report Post  
Old February 11th 06, 12:15 AM posted to uk.d-i-y
[email protected]
 
Posts: n/a
Default My ALDI router does not fit the table ! ARGHH help

After reading the small print. My router accepts up to 155mm diameter.

The router I purchased that sat next to the table is 160mm wide ! I am
sure that a few other ALDI customers have been back before me.

So do I take the table back, take just the router back or both !

Not sure what was better value, I must say that for 40 the table
seems quite good. The router I think was 35 ?



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
I've Decided On My New Router Table Design J T Woodworking 4 January 26th 06 03:45 PM
Dream Router Table Brian Henderson Woodworking 10 January 17th 06 12:54 AM
"Stoopid" Simple Router Table Extension [email protected] Woodworking 0 March 7th 05 07:35 PM
router for a Porter-Cable router table? Dave Gower Home Repair 8 March 2nd 05 05:55 AM
Review of the new Porter Cable 895PK- Part 1 Greg G. Woodworking 37 January 8th 04 02:37 AM


All times are GMT +1. The time now is 10:26 PM.

Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017