Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Router Bits
Hi,
Can anyone recommend a brand of router bit that sits between the nasty cheap ones and the £40 plus Trend ones. Can't seem to find any mid range type bits, are there none out there? TIA |
#2
Posted to uk.d-i-y
|
|||
|
|||
Router Bits
On Fri, 9 Dec 2005 09:23:52 -0000, "flash" wrote:
Can anyone recommend a brand of router bit that sits between the nasty cheap ones and the £40 plus Trend ones. CMT (best) or Axminster yellow (cheaper) Jesada (if you can find old stock) are good, or Infinity if you can find them imported from the USA. Trend are _very_ overpriced. |
#3
Posted to uk.d-i-y
|
|||
|
|||
Router Bits
"Andy Dingley" wrote in message ... On Fri, 9 Dec 2005 09:23:52 -0000, "flash" wrote: Can anyone recommend a brand of router bit that sits between the nasty cheap ones and the £40 plus Trend ones. CMT (best) or Axminster yellow (cheaper) Jesada (if you can find old stock) are good, or Infinity if you can find them imported from the USA. Cheers for that. Trend are _very_ overpriced. Hoh yuss. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Router Bits
Andy Dingley wrote: On Fri, 9 Dec 2005 09:23:52 -0000, "flash" wrote: Can anyone recommend a brand of router bit that sits between the nasty cheap ones and the £40 plus Trend ones. CMT (best) or Axminster yellow (cheaper) Jesada (if you can find old stock) are good, or Infinity if you can find them imported from the USA. Trend are _very_ overpriced. You might also want to take a look at http://www.wealdentool.com/acatalog/...Cutters_1.html. Not used them yet but they seem to be well recommended. Andrew |
#5
Posted to uk.d-i-y
|
|||
|
|||
Router Bits
I have bought from Whealden Tools several times over the last 2 - 3
years. They are nice to deal with, have an excellent range, and offer very good value for money. Andrew writes You might also want to take a look at http://www.wealdentool.com/acatalog/...Cutters_1.html. Not used them yet but they seem to be well recommended. -- Roger |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Router bits Price & Quality | Woodworking | |||
Grizzly vs Freud Router Bits | Woodworking | |||
Question about router bits | Woodworking | |||
Router bits - 1/4" vs. 1/2" , which brands | Woodworking | |||
Can one use the Dremel Advantage Plunge Router Attachment (Model 963-01) with Standard Router Bits? | Woodworking |