Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Worcester Heatslave 9 - 24 Low hot water flow
Hi can anyone help
I have a worcester 9 - 24 heatslave combi boiler. I have just replaced the pump and diverter valve. The CH heating is working fine but I can't get any hot water. When I turn on the hot water tap the flow is very low i.e not at mains pressure as it should be. Anyone got any ideas? Cheers |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Heat banks (again!) | UK diy | |||
Water Softeners, good or bad?? | Home Repair | |||
Thankless or Tankless hot water heaters | Home Repair | |||
Flushing / Cleaning Hot Water Heater Help Needed | Home Repair | |||
Kitchen Aid Side-by-side - Water Dispenser/Filter Problem | Home Repair |