Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Suggestions wanted. What can we craft with the empty 35mm film cannisters?
What can we craft with the empty 35mm film cannisters, that would be
saleable in flea markets? |
#2
|
|||
|
|||
fancy nospam tunes wrote:
What can we craft with the empty 35mm film cannisters, that would be saleable in flea markets? Make a small parts revolving rack, much like a paper towel or toilet paper tube with the tops screwed to the roller with pan head sheet metal screws. The rack could be of most any length and could be mounted to benchtop, bottom of cabinet or wall. The "roller" ought be octagonal or hex around to accept the flat tops. Identifying parts could be hot glued or whatever to the bottom of the film cans... Bill |
#3
|
|||
|
|||
Popguns that use a spritz of binaca breath freshener as a propellant
and a piezo igniter to make the spark. You fasten the lid firmly to a piece of wood and when the fuel ignites the canister part flies off a good 20' (other fuels work, this is training wheels for the potato cannon) |
#4
|
|||
|
|||
On a similar note, the pyro guys fill them with powder and fireworks
stars, attach a timing fuse, seal them and fire them into the air out of a mortar as a mini aerial bomb. I've never seen it done, but I'm told that they work pretty good for the purpose. Harry C. |
#5
|
|||
|
|||
"fancy nospam tunes" wrote in message
om... What can we craft with the empty 35mm film cannisters, that would be saleable in flea markets? They are sometimes used for winding inductors by radio amateurs and other people building radios. Leon |
#6
|
|||
|
|||
fuel tank .049...
xman |
#7
|
|||
|
|||
Canister shell.
JR Dweller in the cellar xmRadio wrote: fuel tank .049... xman -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth If you're not the lead dog, the view never changes Doubt yourself, and the real world will eat you alive The world doesn't revolve around you, it revolves around me No skeletons in the closet; just decomposing corpses -------------------------------------------------------------- Dependence is Vulnerability: -------------------------------------------------------------- "Open the Pod Bay Doors please, Hal" "I'm sorry, Dave, I'm afraid I can't do that.." |
#8
|
|||
|
|||
Check this out. Has a clear Plexiglas cover.
http://www.canadianwoodworking.com/N...allstorage.JPG John. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "fancy nospam tunes" wrote in message om... What can we craft with the empty 35mm film cannisters, that would be saleable in flea markets? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Suggestions for making a "ring" | Woodworking | |||
CH. Thanks AND request for some suggestions to go sealed. | UK diy | |||
Router Bit Suggestions | Woodworking | |||
Designing home office with plenty of space... suggestions please | Woodworking | |||
wood suggestions / budget drill recommendations | Woodworking |