Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
ATTN: Tom Gardner..................
Do you have any brushes similar to Black Knight brand Filter brushes?
If not, it may be worth your interests to check into them, as they seem to be pretty darn hot item amojng KOI enthusiasts............ They are in 3 different diameters from 4" up to 8" , and lengths from about 8" to 48" and constructed with polypropylene twisted into two stainless steel wires to form a cylindrical brush with a loop at one end for hanging. You can see what I am talking about here if interested. http://www.aquaticpondsupplies.com/brushes.htm They are certainly a big item and most setups usually involve quite a few brushes to be used........ Regards Roy Visit my website: http://www.frugalmachinist.com Opinions expressed are those of my wife, I had no input whatsoever. Remove "nospam" from email addy. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Attn: Woodturners in Isolated areas | Woodturning |