 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Bending help please
Anybody here have press brake experience? I was to start with 3x3x.375
6061-T6 aluminum Tee extrusion, 4 inches long, and bend up the top of the Tee on each side 30 degrees. So the part will then have a Y shape. Can 6061-T6 be bent that much without cracking? And how much tonnage should the press be to do this work? Thanks, Eric |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Bending EMT | Woodworking | |||
| Bending Oak | Woodworking | |||
| Bending 8mm and 10mm pipe, bending spring or cheap pipe bender? | UK diy | |||
| Bending PCV | Woodworking | |||
| Bending/twisting wood (was Bending Oak) | Woodworking | |||
Threaded Mode
