Would it be a bad idea to daisy chain tanks? I have one extra, and at
times, I just run out of air. Or would it overwork the compressor?

Steve

SteveB fired this volley in news:l8adbl$v4j$2
@speranza.aioe.org:

Would it be a bad idea to daisy chain tanks? I have one extra, and at
times, I just run out of air. Or would it overwork the compressor?

Guess who never reads any recent posts before posting himself! G

Lloyd

On 2013-12-11, SteveB wrote:
Would it be a bad idea to daisy chain tanks? I have one extra, and at
times, I just run out of air. Or would it overwork the compressor?

It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

i

Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.
G
Lloyd

On 12/11/2013 11:10 AM, SteveB wrote:
Would it be a bad idea to daisy chain tanks? I have one extra, and at
times, I just run out of air. Or would it overwork the compressor?

Steve
The definition of "running out of air" is that the compressor is on all
the time.
More tank only delays the onset according to the size of the tank.
it only makes sense if your use is intermittent and that intermittency
fits.
Sure, you can come up with a counterexample, but in the general
case, your compressor will run longer, but less frequently...unitl
you "run out of air".

On Wed, 11 Dec 2013 13:39:59 -0600, Ignoramus7589
wrote:

On 2013-12-11, SteveB wrote:
Would it be a bad idea to daisy chain tanks? I have one extra, and at
times, I just run out of air. Or would it overwork the compressor?

It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

i

Ive got daisychained thanks here. I often leave the sub tank turned
off, but if I need to sandblast..or run air way out in the back 40..I
turn it on. Takes about 50% longer to fill em both..but the compressor
doesnt run as often once they are filled.

Shrug...depends on what you need to use air for. For me..its running
the plasma cutter, spray painting, blowing gook off machines and
filling tires.

Gunner

--
"Owning a sailboat is like marrying a nymphomaniac. You don’t want to do that
but it is great if your best friend does. That way you get all the benefits without any of the upkeep"

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

On 12/11/2013 12:20 PM, Lloyd E. Sponenburgh wrote:
SteveB fired this volley in news:l8adbl$v4j$2
@speranza.aioe.org:

Would it be a bad idea to daisy chain tanks? I have one extra, and at
times, I just run out of air. Or would it overwork the compressor?

Guess who never reads any recent posts before posting himself! G

Lloyd

Sorry, but my life does not revolve around my computer. I am busy
living and doing things. If I miss **** on my computer, I miss ****.
It's not like I read it every day. I recently went without one for
three months or so. Didn't miss it a lot.

People who are umbilically tied to their computers must have a sucky life.

Steve

"SteveB" wrote in message
...
On 12/11/2013 12:20 PM, Lloyd E. Sponenburgh wrote:
SteveB fired this volley in
news:l8adbl$v4j$2
@speranza.aioe.org:

Would it be a bad idea to daisy chain tanks? I have one extra,
and at
times, I just run out of air. Or would it overwork the
compressor?

Guess who never reads any recent posts before posting himself! G

Lloyd

Sorry, but my life does not revolve around my computer. I am busy
living and doing things. If I miss **** on my computer, I miss
****. It's not like I read it every day. I recently went without
one for three months or so. Didn't miss it a lot.

People who are umbilically tied to their computers must have a sucky
life.

Steve


The thread is " Valve to fill additional compressed air tank". We
came up with several methods to prioritize the valving so the primary
tank stays full and the other takes any excess.
jsw

On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.

I do want to be less nice.

i

On Wednesday, December 11, 2013 8:17:53 PM UTC-8, Ignoramus7589 wrote:
On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:

Ignoramus7589 fired this volley in

:





It should be fine with any decent compressor. Put a valve between

tanks, so that you can start working sooner after turning the

compressor on.



You're too kind, Ig. I should take "nice" lessons from you.



I do want to be less nice.



i

iggy is already pretty ****ing stupid with his approach to machining and welding. Since iggy has no mechanical ability and no clues why he's so ****ed in the head, I'm sure iggy can find plenty of time to become even more of an asshole than he already is.

"Ignoramus7589" wrote in message
...
On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.

I do want to be less nice.

i

Don't want to hijack the thread, but thought you might like this...

http://www.wimp.com/carlake/

On Wednesday, December 11, 2013 1:41:33 PM UTC-8, Gunner Asch wrote:
On Wed, 11 Dec 2013 13:39:59 -0600, Ignoramus7589

wrote:



On 2013-12-11, SteveB wrote:

Would it be a bad idea to daisy chain tanks? I have one extra, and at

times, I just run out of air. Or would it overwork the compressor?



It should be fine with any decent compressor. Put a valve between

tanks, so that you can start working sooner after turning the

compressor on.



i



Ive got daisychained thanks here. I often leave the sub tank turned

off, but if I need to sandblast..or run air way out in the back 40..I

turn it on. Takes about 50% longer to fill em both..but the compressor

doesnt run as often once they are filled.



Shrug...depends on what you need to use air for. For me..its running

the plasma cutter, spray painting, blowing gook off machines and

filling tires.



Gunner



--

"Owning a sailboat is like marrying a nymphomaniac. You don�t want to do that

but it is great if your best friend does. That way you get all the benefits without any of the upkeep"



---

This email is free from viruses and malware because avast! Antivirus protection is active.

http://www.avast.com

In Wieber's case the back 40 is what? 40 feet he can walk without running into any of the junk he's got piled up on his small lot or would that be 40 inches?

On Wednesday, December 11, 2013 11:10:49 AM UTC-8, SteveB wrote:
Would it be a bad idea to daisy chain tanks? I have one extra, and at

times, I just run out of air. Or would it overwork the compressor?



Steve

How about you figure out the extreme importance of recovery rate is and what it means to you and your application(s).

I'm praying I'm in your kill file and you can't read this so you can make yourself look like an asshole for 10 more posts. I needed the entertainment.

On Wednesday, December 11, 2013 11:20:32 AM UTC-8, Lloyd E. Sponenburgh wrote:
SteveB fired this volley in news:l8adbl$v4j$2

@speranza.aioe.org:



Would it be a bad idea to daisy chain tanks? I have one extra, and at

times, I just run out of air. Or would it overwork the compressor?



Guess who never reads any recent posts before posting himself! G



Lloyd

Guess who beside Precision Machinist knows SteveB is a ****ing moron.

On Wednesday, December 11, 2013 7:31:08 PM UTC-8, SteveB wrote:
On 12/11/2013 12:20 PM, Lloyd E. Sponenburgh wrote:

SteveB fired this volley in news:l8adbl$v4j$2

@speranza.aioe.org:



Would it be a bad idea to daisy chain tanks? I have one extra, and at

times, I just run out of air. Or would it overwork the compressor?



Guess who never reads any recent posts before posting himself! G



Lloyd



Sorry, but my life does not revolve around my computer. I am busy

living and doing things. If I miss **** on my computer, I miss ****.

It's not like I read it every day. I recently went without one for

three months or so. Didn't miss it a lot.



People who are umbilically tied to their computers must have a sucky life..



Steve

What does revolving your life around a computer have anything to do with your very low comprehension rate, your lousy mechanical abilities and your inability to teach yourself? Instead you post dumb question after dumb question. The reason you do this is because... wait for it... you're lazy and you refuse to do the required reading and instead expect others to do the most basic things for you.

On Wed, 11 Dec 2013 22:17:53 -0600, Ignoramus7589
wrote:

On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.

I do want to be less nice.

i

So use "Yob Tvoyu Mat " more often.

Gunner

--
"Owning a sailboat is like marrying a nymphomaniac. You don’t want to do that
but it is great if your best friend does. That way you get all the benefits without any of the upkeep"

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

On 2013-12-12, Rick wrote:

"Ignoramus7589" wrote in message
...
On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.

I do want to be less nice.

i

Don't want to hijack the thread, but thought you might like this...

http://www.wimp.com/carlake/


Just yesterday, I was doing something similar. I have a hydraulic unit
on my semi trailer beavertail. Water made it into hydraulic oil. We
changed oil in the tank and I told them to purge cylinders too.

These IDIOTS did not do it and swore that "oil was good in
cylinders". It was not good, of course, and yesterday, at 10F, the
pump strainer clogged with ice again. It was at a job site and we did
not have any heaters to heat it up. So I had to improvise, put an oily
rag on a steel stick and made a torch that way.

i

On Thu, 12 Dec 2013 09:19:09 -0600, Ignoramus31022
wrote:

On 2013-12-12, Rick wrote:

"Ignoramus7589" wrote in message
...
On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.

I do want to be less nice.

i

Don't want to hijack the thread, but thought you might like this...

http://www.wimp.com/carlake/


Just yesterday, I was doing something similar. I have a hydraulic unit
on my semi trailer beavertail. Water made it into hydraulic oil. We
changed oil in the tank and I told them to purge cylinders too.

These IDIOTS did not do it and swore that "oil was good in
cylinders". It was not good, of course, and yesterday, at 10F, the
pump strainer clogged with ice again. It was at a job site and we did
not have any heaters to heat it up. So I had to improvise, put an oily
rag on a steel stick and made a torch that way.

The watery oil and the oily rag and stick torch should be returned to
the guy's desk who sold you that rig, Ig. Just so he knows.

You said you wanted to be less nice, and this is perfect timing.
evil grinne

P.S: Um, I suggest that the torch be given to him UNlit.

--
And the day came when the risk to remain tight in a bud
was more painful than the risk it took to blossom.
-- Anaïs Nin

On 2013-12-12, Larry Jaques wrote:
On Thu, 12 Dec 2013 09:19:09 -0600, Ignoramus31022
wrote:

On 2013-12-12, Rick wrote:

"Ignoramus7589" wrote in message
...
On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.

I do want to be less nice.

i

Don't want to hijack the thread, but thought you might like this...

http://www.wimp.com/carlake/


Just yesterday, I was doing something similar. I have a hydraulic unit
on my semi trailer beavertail. Water made it into hydraulic oil. We
changed oil in the tank and I told them to purge cylinders too.

These IDIOTS did not do it and swore that "oil was good in
cylinders". It was not good, of course, and yesterday, at 10F, the
pump strainer clogged with ice again. It was at a job site and we did
not have any heaters to heat it up. So I had to improvise, put an oily
rag on a steel stick and made a torch that way.

The watery oil and the oily rag and stick torch should be returned to
the guy's desk who sold you that rig, Ig. Just so he knows.

You said you wanted to be less nice, and this is perfect timing.
evil grinne

P.S: Um, I suggest that the torch be given to him UNlit.


Personally, I think that it is our fault.

i

On Thu, 12 Dec 2013 09:59:50 -0600, Ignoramus31022
wrote:

On 2013-12-12, Larry Jaques wrote:
On Thu, 12 Dec 2013 09:19:09 -0600, Ignoramus31022
wrote:

On 2013-12-12, Rick wrote:

"Ignoramus7589" wrote in message
...
On 2013-12-11, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus7589 fired this volley in
:


It should be fine with any decent compressor. Put a valve between
tanks, so that you can start working sooner after turning the
compressor on.

You're too kind, Ig. I should take "nice" lessons from you.

I do want to be less nice.

i

Don't want to hijack the thread, but thought you might like this...

http://www.wimp.com/carlake/


Just yesterday, I was doing something similar. I have a hydraulic unit
on my semi trailer beavertail. Water made it into hydraulic oil. We
changed oil in the tank and I told them to purge cylinders too.

These IDIOTS did not do it and swore that "oil was good in
cylinders". It was not good, of course, and yesterday, at 10F, the
pump strainer clogged with ice again. It was at a job site and we did
not have any heaters to heat it up. So I had to improvise, put an oily
rag on a steel stick and made a torch that way.

The watery oil and the oily rag and stick torch should be returned to
the guy's desk who sold you that rig, Ig. Just so he knows.

You said you wanted to be less nice, and this is perfect timing.
evil grinne

P.S: Um, I suggest that the torch be given to him UNlit.


Personally, I think that it is our fault.

?

Then pour the oil over your -own- desk. g

--
And the day came when the risk to remain tight in a bud
was more painful than the risk it took to blossom.
-- Anaïs Nin