Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
using 1/8" 6061 for aluminum radiator?
I am making aluminum tanks for my truck's radiator. I am planning on
using 1/8" thick sheet because the reason that none of the plastic tanks hold up is that they flex and distort. The only welder I have is an oxy-acetylene torch. Can I weld the tanks using 1/8" 6061? (What I mean is,,,, I can WELD 1/8" aluminum, but I know that in thinner sheets the 6061 tend to crack) The tanks are about 20 x 3 x 4 inches. I will try to get 5052 or something softer if they have it, but may be stuck with the usual. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
What does the number in " 6061 aluminum " mean ? | Metalworking | |||
TIG Welding 6061 aluminum | Metalworking | |||
Buying stock, aluminum, 6061 versus 6063? | Metalworking | |||
Difference between Aluminum 6061 and Aluminum 12 | Metalworking | |||
Cast aluminum with embeded 6061-T6 aluminum rods | Metalworking |