Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Splined shaft questions....
Gunner Asch writes:
There is some wear on the splined shaft from the transmission and the clutch basket is wobbling on it with that loose nut. .... Whats the fix for this? New guts for both? Steel epoxy with release agent on one half? I dont think there is more than .010 wear..but there is wear and the basket rocks significantly. Vague half-memory: Some BMW 2002 sedans had an issue with the output splines fretting. Then at some point, usually startup from a stoplight, they'd fail...and the unloaded engine would blow. There was a extra-special epoxy BMW used to stop the fretting. -- A host is a host from coast to & no one will talk to a host that's close........[v].(301) 56-LINUX Unless the host (that isn't close).........................pob 1433 is busy, hung or dead....................................20915-1433 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Splined shaft questions.... | Metalworking | |||
Splined shaft questions.... | Metalworking | |||
Splined shaft questions.... | Metalworking | |||
Forming splined form to round aluminium pot shaft | Electronics Repair | |||
Sprocket on keyed or splined shaft? | Metalworking |