Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 7
Default WTB - Rigging -- Steve B

Steve, here's what I have. I am not saying that I will sell
everything, of course. Pretty much none of this stuff will fit a flat
rate box, other than 1" slings.

http://igor.chudov.com/misc/ebay/tmp...n/399.jpg.html

1. Lots of 3" liftall lifting slings, 11k single line capacity.

2. Even more 1 to 2 inch listing slings, some supersoft and some
regular. Two eyed and endless loops.

3. Two, 3/8" wire rope bunches with a hook on one end. Hook says made
in China. I estimate length as 100 and 150 feet in the two bundles.
They are New.

4. Lots of threaded female lifting eyes, about 1/2 to 5/8" threads.

5. Small wire rope lifting sling, 3ft, 5/8" or so wire rope.

6. Huge two legged 3/4" wire rope lifting sling, 20 foot each leg.Nice
fish hooks on each leg. I am sure that you cannot use it, this is
for the big boys.

7. Lots of mostly Sala fall protection harness elements.

8. 8" wide, 6 or so foot long cradling lifting slings. I am sure you
do not need them.

9. Spool of about 1/2 or 5/8 galvanized wire rope, probably too big
for you also.

10. Great Thermal Arc inverter welders. http://goo.gl/o6s7l
Made in Japan.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bad crane rigging example - video James Waldby[_3_] Metalworking 45 June 22nd 11 04:43 PM
TJI rigging? mfreak Home Repair 5 March 11th 06 07:32 PM
Rigging apology Steve B Metalworking 7 March 7th 06 03:27 AM
Do it yourself tool rigging Mike Berger Metalworking 20 January 24th 06 02:51 AM


All times are GMT +1. The time now is 01:57 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"