 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Durable cheap finish for home bu...
Cheap - try Ace Hardware's high temperature flat black in a spray can. It
leaves an almost flat black; there's a modest sheen to the surface. I have a piece of aluminum angle before me now and I couldn't remove any paint by scraping an edge with a finger nail. This was allowed to dry, then baked at 250 degf for a couple of hours. Hul |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Durable cheap finish for home built receiver | Metalworking | |||
| Clear, durable finish for redwood? | Woodworking | |||
| Pens, what's the most durable finish? | Woodturning | |||
| Most durable finish for a tabletop | Woodworking | |||
| What do I paint on new Plasterboard for a durable finish? | UK diy | |||
Linear Mode
