Here are the pictures of the bad seal and the valve. Do the seals look
like common items?

http://igor.chudov.com/projects/Brid...eumatic-Valve/

i

On Wed, 18 Aug 2010 21:20:44 -0500, Ignoramus28889
wrote:

Here are the pictures of the bad seal and the valve. Do the seals look
like common items?

http://igor.chudov.com/projects/Brid...eumatic-Valve/

i


There is one advantage..that rod everything is mounted on comes apart
and you can machine a replacement seal fairly easily on your lathe.

Just use razor sharp positive rake HSS tooling.

Gunner

--


"First Law of Leftist Debate
The more you present a leftist with factual evidence
that is counter to his preconceived world view and the
more difficult it becomes for him to refute it without
losing face the chance of him calling you a racist, bigot,
homophobe approaches infinity.

This is despite the thread you are in having not mentioned
race or sexual preference in any way that is relevant to
the subject." Grey Ghost

Ignoramus28889 wrote:

Here are the pictures of the bad seal and the valve. Do the seals look
like common items?

http://igor.chudov.com/projects/Brid...eumatic-Valve/

i

If you can find a local place that sells pneumatic components you can
likely just bring the spool down and they can find you the correct
parts. If you want to replace the whole valve, McMaster seems to have
suitable replacements for $100.

On 2010-08-19, Pete C. wrote:

Ignoramus28889 wrote:

Here are the pictures of the bad seal and the valve. Do the seals look
like common items?

http://igor.chudov.com/projects/Brid...eumatic-Valve/

i

If you can find a local place that sells pneumatic components you can
likely just bring the spool down and they can find you the correct
parts. If you want to replace the whole valve, McMaster seems to have
suitable replacements for $100.

Pete, a new Univer AE-1001 was $113. A kit was $40. I decided, to heck
with it, and got the whole new valve.

i

On Aug 19, 11:13*am, Ignoramus12820 ignoramus12...@NOSPAM.
12820.invalid wrote:
On 2010-08-19, Pete C. wrote:



Ignoramus28889 wrote:

Here are the pictures of the bad seal and the valve. Do the seals look
like common items?

http://igor.chudov.com/projects/Brid...teract-2-CNC-M....

i

If you can find a local place that sells pneumatic components you can
likely just bring the spool down and they can find you the correct
parts. If you want to replace the whole valve, McMaster seems to have
suitable replacements for $100.

Pete, a new Univer AE-1001 was $113. A kit was $40. I decided, to heck
with it, and got the whole new valve.

i

Take a look here..

A lot less than $100 !!

You have to register to see the prices, something about them
contractually obligated to not let them be "Public".

But, as I said, a lot less than $100, for a generic two way valve.