 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for 5MM or 3/16 HP tubing
I'm trying to make replacement probes for a fasttest connector.
The tubing is 5 mm and about 1.5MM [.060"] id. I took a chance on some 3/16" 0.090" since it was close and available at Mcmasters. I think it is going to be weak where I have to thread it. The only tubing I know of is even close on ID is 1/4" 150PSI tubing. http://www.highpressure.com/valves_f...pe=t§ion=4 Having worked with waterjet systems, that came to mind. I could make it work but I'd have to remake other parts of the tester. Anyone have a source for what I'm looking for? 304 SS would be nice, carbon steel acceptable. Thanks, Wes |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Source Of Foam Tubing | UK diy | |||
| Source of Stainless Steel Tubing | UK diy | |||
| aluminum square tubing source? | Metalworking | |||
| tiny plastic tubing source | Metalworking | |||
| Source for 1.25" layflat tubing? | UK diy | |||
![Wes[_2_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
