Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
PING: GUNNER- High-Speed Spindle
Have you got a 10krpm spindle gathering dust? I need to spin a 6"-7" x
1/16"-3/32" cut-off disk with 1-2 hp. I had bought a Deil (sp) a few years ago but I can't find it. The spindle I have in use now is shop-made using Barden bearings. It's not perfect enough and it's a bit noisy with vibration. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
PING: GUNNER- High-Speed Spindle
On Sun, 31 Jan 2010 00:44:40 -0500, "Buerste"
wrote: Have you got a 10krpm spindle gathering dust? I need to spin a 6"-7" x 1/16"-3/32" cut-off disk with 1-2 hp. I had bought a Deil (sp) a few years ago but I can't find it. The spindle I have in use now is shop-made using Barden bearings. It's not perfect enough and it's a bit noisy with vibration. Nope..I sure dont. But Ill check around. What size arbor/chuck do you need? Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
PING: GUNNER- High-Speed Spindle
Nope..I sure dont. But Ill check around. What size arbor/chuck do you need? Gunner I use a 6" x 1/16" cut-off disk to trim end brushes. 1/2" or 5/8" AH |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
PING: GUNNER- High-Speed Spindle
On Sun, 7 Feb 2010 11:12:31 -0500, "Buerste" wrote:
Nope..I sure dont. But Ill check around. What size arbor/chuck do you need? Gunner I use a 6" x 1/16" cut-off disk to trim end brushes. 1/2" or 5/8" AH Ill see what I can do. Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
PING: Gunner | Metalworking | |||
Ping Gunner !!! | Metalworking | |||
Ping: Gunner | Metalworking | |||
Hardinge spindle bearing ? (Gunner) | Metalworking | |||
OT - Ping Gunner | Metalworking |