 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Running ditch for conduit
I am running a ditch about 200 feet from my house to run power to my
building. I see no way from making turns because I have to avoid septic tank, etc. I will use pvc. Is it best to run gently turns minimizing the sharpness of the angle or just do 90's and the appropriate 90 degree fitting? WIll I be able to pull wire at a later date if I do the 90's? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Running water line/conduit | Metalworking | |||
| Running water line/conduit | Metalworking | |||
| Running conduit in the basement | Home Repair | |||
| running conduit | Home Repair | |||
| Running SWA and Cat5 in same conduit? | UK diy | |||
![stryped[_3_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
