Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Help with mounting light on metal building
I planned to use a motion detector with the two flood lights centered
above my garage door. I started cutting thinking I would put a plastic box behind the metal siding inside the garage. However, being centered it is over a raised rib where two panels meet and it looks like I made a mess. It was hard to cut and I just stopped. Any ideas on how to properly mount this light and make it look ok and not leak? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Light switch mounting | UK diy | |||
Mounting Sheet Metal? | Home Repair | |||
Mounting Ikea Effektiv Cabinet on drywall with metal studs | Home Repair | |||
Fitting the metal mounting sleeve for Kenwood Receiver | UK diy | |||
Mounting a metal shear | Metalworking |