Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Morse Taper Questions...
I've always thought the tang at the back of a Morse Taper was for
insurance... Or in other words, if the tool slipped, the tang provided drive. I was told today that a MT1 has more holding power than a Jacobs J33 taper without the tang... This makes me wonder... Is the tang for driving the tool rotationally, material to remove the taper without damaging it, combination? Thoughts? Charts on their ratings without the tang, etc? Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for Morse taper/1-8 adapter | Woodturning | |||
#2 morse taper to 1" - 8 | Woodturning | |||
Morse Taper Sticks? | Woodturning | |||
morse taper | Metalworking | |||
2 Morse taper extender to 3 taper, then 1 inch threading die holder | Metalworking |