Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 721
Default Happy Thanksgiving to All Our American Buddies

Hey All,

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.

Take care.

Brian Lawson,
Bothwell, Ontario.
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,444
Default Happy Thanksgiving to All Our American Buddies

Hey Brian,

Thank you for your glad tidings.

Once in a while, I like to think about how truly good life has been
to me (and by extension, to all of the rest of the groupers here).

Our experience is so unlike that of the rest of the planet's people!

Happy Holidays!

--Winston
Silicon Valley, California


  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 523
Default Happy Thanksgiving to All Our American Buddies

Second that !

Bob Swinney
"Winston" wrote in message ...
Hey Brian,

Thank you for your glad tidings.

Once in a while, I like to think about how truly good life has been
to me (and by extension, to all of the rest of the groupers here).

Our experience is so unlike that of the rest of the planet's people!

Happy Holidays!

--Winston
Silicon Valley, California


  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,562
Default Happy Thanksgiving to All Our American Buddies

Brian Lawson wrote:

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.



Ah tomorrow will be a fine day. The family all around and good food and talk at the
table.

Happy Thanksgiving back at you Brian and the rest of the group also,

Wes
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5,154
Default Happy Thanksgiving to All Our American Buddies

On Wed, 26 Nov 2008 17:25:51 -0500, the infamous Brian Lawson
scrawled the following:

Hey All,

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.


Right, Happy Birdday to everyone.

Um, has someone already warned turkeys like Cliffy and Parakeet to
duck tomorrow? Oh, good!

--
Every day above ground is a Good Day(tm).
-----------


  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 65
Default Happy Thanksgiving to All Our American Buddies

Brian Lawson wrote:
Hey All,

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.

Take care.

Brian Lawson,
Bothwell, Ontario.


Thanks Brian;

Looking to the east, everyday is a new chance, I'm a very happy riser
and peaceful sleeper (Snorer?).

If I make a BAD golf shot, at least I'm on the right side of the grass....

Matt
  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 721
Default Happy Thanksgiving to All Our American Buddies

On Thu, 27 Nov 2008 05:03:30 -0600, matthew maguire
wrote:

Brian Lawson wrote:
Hey All,

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.

Take care.

Brian Lawson,
Bothwell, Ontario.


Thanks Brian;

Looking to the east, everyday is a new chance, I'm a very happy riser
and peaceful sleeper (Snorer?).

If I make a BAD golf shot, at least I'm on the right side of the grass....

Matt



Hey Matt,

Great attitude. Good line!!

Brian
  #8   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 97
Default Happy Thanksgiving to All Our American Buddies

On Wed, 26 Nov 2008 17:25:51 -0500, Brian Lawson
wrote:

Hey All,

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.

Take care.

Brian Lawson,
Bothwell, Ontario.


Thanks Brian. Thanksgiving Day came a bit early for me this year.
Tuesday was our annual shop Fair/Open House at school and a bunch of
last Junes grad showed up. Every one of them working iin the trade
and continuing to learn. One fellow did a small comversational
program on the TRAK mill. Beep, beep in rapid succession and he had
it running. Last year it was beep............beep and son on. Great
to see him so confident. Another showed me a cell phone picture of a
drill bit he is working on, 7000 lbs and tons of complex CNC milling
on it.

Another former student is in his second year at University of
Connecticut school of engineering, on full scholarship to boot. He
continues to work at Whitcraft Tool a local top level shop. They love
hime there and his future is unlimited.

Really made my day and makes up for the chuckle heads that come
through the shop.

Errol Groff

Instructor, Machine Tool Department
H.H. Ellis Technical High School
Danielson, CT


  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 12,529
Default Happy Thanksgiving to All Our American Buddies


"Brian Lawson" wrote in message
...
Hey All,

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.

Take care.

Brian Lawson,
Bothwell, Ontario.


Thank you, Brian. We feel the same way. Everyone is together, the pumpkin
pie just came out of the oven and the turkey just went in. No rain, no wind,
and the ancient furnace is still putting out heat. Loose shoes, etc...let
the economy go to hell, I'll take this any day.

--
Ed Huntress


  #10   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,384
Default Happy Thanksgiving to All Our American Buddies

Brian Lawson wrote:
Hey All,

Happy Thanksgiving to All !! And despite the recent monetary woes,
there is still plenty to be thankful for...in fact. at 68 I'm thrilled
every day my feet hit the floor; but this Thursday is a day set aside
to be thinking of family and friends, so make it a happy day.

Take care.

Brian Lawson,
Bothwell, Ontario.


Thanks Brian, but **YOU'RE** an American, too!

Jon
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Happy Thanksgiving Lord Garth Electronic Schematics 14 November 25th 07 08:47 PM
Happy Thanksgiving! mac davis Woodturning 3 October 10th 06 03:03 AM
Happy Thanksgiving...THE REAL STORY OF THANKSGIVING Cliff Metalworking 13 November 30th 05 11:01 PM
Happy Thanksgiving to All Mark & Juanita Woodworking 2 November 24th 05 07:13 PM
OT Happy Thanksgiving Colbyt Home Repair 4 November 24th 05 06:39 PM


All times are GMT +1. The time now is 10:46 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"