Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Drilling/tapping the ends of long stuff on a vmc or BP
Jon Anderson wrote:
I saw a manual mill on ebay once with a spindle mounted in the base casting. Pictures didn't reveal exactly how it was done or what drove it. But it would have been perfect for edge drilling plate or end working long parts. That sorta sounds like a Gorton. Wes -- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
drilling through 4" of acrylic without melting the stuff? | Metalworking | |||
Drilling dowel ends | Woodworking | |||
Drilling/tapping endholes in long rectangular bar | Metalworking | |||
Source for long self tapping screws? | UK diy | |||
Why you should bevel the ends of tenons (long) | Woodworking |