Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Boom pole
Any idea on some construction plans or how a person could build one? I
have some pipe laying around. Been thinking this would be a good project to get my welding skills in order and the boom could be used when I do build that trailer to raise the frame and things when needed. I only have an old 8n though. How much could that lift? |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Boom pole
The 3pt lift on 8n is not going to be as impressive as a newer tractor.
The shorter the pole, the more you can lift... Look at the specs for a commercially made boom as a guide. "stryped" wrote in message ... Any idea on some construction plans or how a person could build one? I have some pipe laying around. Been thinking this would be a good project to get my welding skills in order and the boom could be used when I do build that trailer to raise the frame and things when needed. I only have an old 8n though. How much could that lift? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to run outdoor electrical lines from pole to pole - What's required | Home Repair | |||
4 pole to 3 pole Extension Cord. | Home Repair | |||
Single pole or double pole? | UK diy | |||
Light switch 3 pole and 2 pole | Home Repair | |||
AC shaded pole single phase induction pole motor | Electronics Repair |