Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Clausing 5914 -- removal of 5C collet holder
I finally got the 5C collet holder out of the 5914 spindle. The
approach was a combination of using the aluminum spindle nose protector to put pressure on the holder and a piece of 1" black iron pipe from the back, hit with a big steel hammer. What gives on the nose protector is the threads, I think. The first few threads on mine are broken off, and have been that way for some time. The holder was caught by a wooden dowel held in the tailstock chuck, with a rag tied around the dowel, thus protecting the ways and the holder. Joe Gwinn |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Clausing 5914 -- First Rotation! | Metalworking | |||
Clausing 5914 Lubricants | Metalworking | |||
Clausing 5914 has arrived | Metalworking | |||
Clausing 5914 Questions | Metalworking | |||
SB Heavy 10 Vs. Clausing 5914 Lathe | Metalworking |