Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Photos in Dropbox (was Gilding Lilies: Goldenrod Repair)
OK, it was a crummy title. I promised an on topic post, if it is a
little silly. Still, the fix works well. See below. Pete Keillor On Wed, 18 Jul 2007 21:23:37 -0400, Pete Keillor wrote: These photos illustrate my over the top fix for a leaking tip on a new Goldenrod oil can. The new diecast tip leaked because of a casting defect. The tip was set in epoxy, so I burned it out. I got the smallest quick connect I could find from Small Parts, threaded 10-32. Then I made a new end of 1/2" and 1/4" brass stock, with a counterbore and internal 10-32 thread on the big piece, and the 1/4" piece threaded to match. Then I attached this assembly to the flex tube with some loctite and screwed in the quick connect. Next, I just turned some tips to fit the different oil points on my lathe and turned the back end to match the male quick connect piece. Now I can change tips to suit, and if I need another, make one with an inch or so of 1/4" brass stock. http://metalworking.com/dropbox/GoldenrodFix00.jpg http://metalworking.com/dropbox/GoldenrodFix01.jpg http://metalworking.com/dropbox/GoldenrodFix02.jpg http://metalworking.com/dropbox/GoldenrodFix03.jpg http://metalworking.com/dropbox/GoldenrodFix04.jpg http://metalworking.com/dropbox/GoldenrodFix05.jpg Pete Keillor |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
4X6 Bandsaw Speed Ctl Photos in Dropbox | Metalworking | |||
OA Cart Finished (was: Photos in Dropbox) | Metalworking | |||
Photos in Dropbox | Metalworking | |||
Repost (again) Photos in dropbox | Metalworking | |||
Welding cart photos in dropbox | Metalworking |