 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Trying to find a 3-48x1.5" machine screw
I'm trying to mount a pickup in a guitar. The screws supplied by the
manufacturer are 3-48x1.25" and are too short. There are few fastener companies selling 3-48 screws to begin with but I can't find anyone selling a 1.5" length. Anyone know where I can get these? Otherwise, I will have to buy a 4-40tpi tap and switch to 4-40 screws. Those I can find in 1.5" lengths. Jaz |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Hardinge Automatic Screw Machine ?s | Metalworking | |||
| Lathe cross feed screw finally gettin bad enough to replace | Metalworking | |||
| Getting 120v Single Phase from 3 Phase | Metalworking | |||
| imperial grub screw | UK diy | |||
| Zanussi washing machine - blown program selector | UK diy | |||
Threaded Mode
