Hi.
Was looking for a list of all the volumes in the old ( Mcgraw-Hill )
"Machine Shop Library"/ "Library of machine shop practice" series,
from some where around 1910 forward.

I only remember the "Tool and Die" volume and the "Jigs and
Fixtures" volume, both of which I believe were by Fred Colvin.

I know there were about 10-12 books in the set though. Does anyone
know all the voilumes?

I tried using the library of congress catalog, but it doesn;t seem to
support listing the volumes within the series (or mabey I just dont
know how to use the system).

TIA
Art

I only remember the "Tool and Die" volume and the "Jigs and
Fixtures" volume, both of which I believe were by Fred Colvin.

I have "Gears and Gear Cutting", Fred Colvin, on my shelf.

On Thu, 20 Oct 2005 11:28:52 GMT, with neither quill nor qualm, Art
quickly quoth:

Hi.
Was looking for a list of all the volumes in the old ( Mcgraw-Hill )
"Machine Shop Library"/ "Library of machine shop practice" series,
from some where around 1910 forward.

www.Amazon.com , search for "library of machine shop practice".
They list 6 titles.

Most of the Audel books list other volumes in their libraries.
Don't McGraw-Hill's?


----------------------------------------------------------------
* OPERA: A Latin word * Wondrous Website Design
* meaning * Save your Heirloom Photos
* "death by music" * http://www.diversify.com
----------------------------------------------------------------

I have American Machinists' Handbook, by Colvin and Stanley, Seventh
edition, copyright 1940. The title page shows the first edition was from
1908 by Hill Publishing. From the second edition in 1914, McGraw-Hill Book
Co. inc. is listed as the copyright holder.

I hope this may be of help.

--
Roger Shoaf
If you are not part of the solution, you are not dissolved in the solvent.

"Art" wrote in message
...
Hi.
Was looking for a list of all the volumes in the old ( Mcgraw-Hill )
"Machine Shop Library"/ "Library of machine shop practice" series,
from some where around 1910 forward.

I only remember the "Tool and Die" volume and the "Jigs and
Fixtures" volume, both of which I believe were by Fred Colvin.

I know there were about 10-12 books in the set though. Does anyone
know all the voilumes?

I tried using the library of congress catalog, but it doesn;t seem to
support listing the volumes within the series (or mabey I just dont
know how to use the system).

TIA
Art

I have 9 volumes. Inside lists Engineering Libraries of the McGraw-Hill
Book Co. There were six libraries Mining (9 volumes), Power plant (8
volumes), Machine Shop(9 volumes, Coal mining & Engineering (8 volumes),
Practical Electricity (8 volumes), and Radcliffe Home Study Course in
Practical Electricity (3 volumes).

The Volumes in the Machine shop library (in no particular order are.
1 "Jig and Fixtures" by Colvin and Haas
2 "Practical Mathematics" by Palmer
3 "Composition and Heat Treatment of Steel" by Lake
4 "Accurate Tool Work" by Goodrich and Stanley
5 "Grinding Book" by Colvin and Stanley
6 "Practical Die Making" by Colvin
7 "American Machinist Gear Book" by Logue
8 "Automatic Screw Machines" by Goodrich and Stanley
9 "Machine Drawing and Design" by Marshall

This set I have are all signed by Gus or Luis E. Hall 1921
I can not make out the first name might be Gus or Luis.
Is there any value for this set? Incidentally Machine shop set lists in the
front of the book for $20.
Bob Sanders

"Art" wrote in message
...
Hi.
Was looking for a list of all the volumes in the old ( Mcgraw-Hill )
"Machine Shop Library"/ "Library of machine shop practice" series,
from some where around 1910 forward.

I only remember the "Tool and Die" volume and the "Jigs and
Fixtures" volume, both of which I believe were by Fred Colvin.

I know there were about 10-12 books in the set though. Does anyone
know all the voilumes?

I tried using the library of congress catalog, but it doesn;t seem to
support listing the volumes within the series (or mabey I just dont
know how to use the system).

TIA
Art

Bob Sanders wrote:

I have 9 volumes. Inside lists Engineering Libraries of the McGraw-Hill
Book Co. There were six libraries Mining (9 volumes), Power plant (8
volumes), Machine Shop(9 volumes, Coal mining & Engineering (8 volumes),
Practical Electricity (8 volumes), and Radcliffe Home Study Course in
Practical Electricity (3 volumes).

The Volumes in the Machine shop library (in no particular order are.
1 "Jig and Fixtures" by Colvin and Haas
2 "Practical Mathematics" by Palmer
3 "Composition and Heat Treatment of Steel" by Lake
4 "Accurate Tool Work" by Goodrich and Stanley
5 "Grinding Book" by Colvin and Stanley
6 "Practical Die Making" by Colvin
7 "American Machinist Gear Book" by Logue
8 "Automatic Screw Machines" by Goodrich and Stanley
9 "Machine Drawing and Design" by Marshall

This set I have are all signed by Gus or Luis E. Hall 1921
I can not make out the first name might be Gus or Luis.
Is there any value for this set? Incidentally Machine shop set lists in the
front of the book for $20.
Bob Sanders


My ex-wife used to manage a used book store (15000 square feet,just to
let people know that it wasn't a hole in the wall). There was a HUGE
difference in pricing between broken sets and complete sets. If even
one volume of a set of 10 or more was missing, the value on the shelf
was dropped by more than half. The value for the used book store to
purchase from a "walk in" dropped by about 90% if a volume was missing.

That being said, in the Seattle area (lots of machinists/tradesmen
around), machine technology books of the older vintages are not in great
demand. The market seems to be only a handful of people who realize
that the old stuff is interesting and that learning how it was done 100
years ago does often apply to today. Price on individual books of the
1900-1940 vintage varied from about $ 5 to $ 15. Sets might go as high
as $ 10 each IF they had lots of drawings and photos and NOT a lot of
tables and math pages.

The exception is anything with Railroad in the title...jack those by
4-10 times or more from general machining/maintenance books.

Just going by the set above (based on casual buyers), Volumes 1,2,3,and
9 have virtually no value. Volume 4, 8 and 5 have a little and the
whole value of the set is volume 6 and 7. Without seeing condition and
content, I'd guess the whole set would be on the shelf for about $ 60
but they would take $ 40

Different areas of the country will vary..as will finding the right buyer.

Like all things in this world, don't bet the farm on what I've said
above. There are always exceptions to the rule.

Koz



"Art" wrote in message
.. .


Hi.
Was looking for a list of all the volumes in the old ( Mcgraw-Hill )
"Machine Shop Library"/ "Library of machine shop practice" series,
from some where around 1910 forward.

I only remember the "Tool and Die" volume and the "Jigs and
Fixtures" volume, both of which I believe were by Fred Colvin.

I know there were about 10-12 books in the set though. Does anyone
know all the voilumes?

I tried using the library of congress catalog, but it doesn;t seem to
support listing the volumes within the series (or mabey I just dont
know how to use the system).

TIA
Art

Thanks to everyone who replied.
Yes, this is the set I was thinking of.

I should have checked ebay;s completed auctions first:.
http://cgi.ebay.com/MACHINIST-ENGINE...QQcmdZViewItem

Art

On Thu, 20 Oct 2005 11:04:19 -0700, "Bob Sanders"
wrote:

I have 9 volumes. Inside lists Engineering Libraries of the McGraw-Hill
Book Co. There were six libraries Mining (9 volumes), Power plant (8
volumes), Machine Shop(9 volumes, Coal mining & Engineering (8 volumes),
Practical Electricity (8 volumes), and Radcliffe Home Study Course in
Practical Electricity (3 volumes).

The Volumes in the Machine shop library (in no particular order are.
1 "Jig and Fixtures" by Colvin and Haas
2 "Practical Mathematics" by Palmer
3 "Composition and Heat Treatment of Steel" by Lake
4 "Accurate Tool Work" by Goodrich and Stanley
5 "Grinding Book" by Colvin and Stanley
6 "Practical Die Making" by Colvin
7 "American Machinist Gear Book" by Logue
8 "Automatic Screw Machines" by Goodrich and Stanley
9 "Machine Drawing and Design" by Marshall

This set I have are all signed by Gus or Luis E. Hall 1921
I can not make out the first name might be Gus or Luis.
Is there any value for this set? Incidentally Machine shop set lists in the
front of the book for $20.
Bob Sanders

Art wrote:
Hi.
Was looking for a list of all the volumes in the old ( Mcgraw-Hill )
"Machine Shop Library"/ "Library of machine shop practice" series,
from some where around 1910 forward.

I only remember the "Tool and Die" volume and the "Jigs and
Fixtures" volume, both of which I believe were by Fred Colvin.

I know there were about 10-12 books in the set though. Does anyone
know all the voilumes?

I tried using the library of congress catalog, but it doesn;t seem to
support listing the volumes within the series (or mabey I just dont
know how to use the system).

TIA
Art


I've got "Machine Shop Primer" by Colvin & Stanley, First Edition 1910.
Apparently not part of the set. Pretty cool book, however. A section of
numbered drawings of tools & machines, followed by a section identing
the drawings, and a glossary section. I was surprised to find that they
used oil-fed drills then.

mj