Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
 
Posts: n/a
Default OT - Bush Takes Cover

Pork Squared!! Still OT but on this one:

Is there anything so pointless as the initiative to rebuild
New Orleans when, given the continuing subsidence of the area,
the continuing rise in sea level, the silting-up of the
existing channel, and increased weather activity due to global
warming, it is a virtual certainty that the recent disaster will
recur within 75 years or less?
((**** Update - It's happening NOW!!********))
Allow the river to take the new course it 'wants` to naturally.
The flow control structure is already largely in place.
The engineering advantages are enormous, A self scouring channel
and reduction of flooding upstream, planned control of further
delta formation and greater longevity for the new port, if the
initiative is properly taken.
Let the old town stagnate while a new port is built and let it
die a natural death after it is replaced. - (The low town can do
service as a flood relief basin, and after a while might silt up to
usable elevation.)
The historic French Quarter lies on higher ground and can be saved,
but in the interest of public safety and economics - let the rest go.

Sorry for the rant, I'm feeling MUCH better now,
MadDog

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT - During disaster, Bush fiddled jim rozen Metalworking 33 September 26th 05 05:15 PM
OT but very important to us all no spam Woodworking 663 July 12th 05 04:12 AM
OT - Christians defend GWB Cliff Metalworking 223 March 2nd 05 05:12 AM
OT-I ain't No senator's son... Gunner Metalworking 378 February 15th 04 04:30 AM
OT-John Kerry Gunner Metalworking 137 February 11th 04 07:38 PM


All times are GMT +1. The time now is 01:23 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"