I have need of an old tool called a 3 cornered scaper. It is at first sight, similar to a triangular file, with no teeth. Does anybody know of a place in the UK where one can be purchased? Or failing that, I was informed that such an implement can be manufactured from an afformentioned triangular file, with the teeth ground off it by a grinding wheel, and three fine edges left on it. Does anyone have any experience of this.

doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.


Not in the UK, but MSC has the imported ones on sale in their September
flyer, $2-$5 depending on the size. At that price, stock up. Surely
they'll ship across the pond. www.mscdirect.com

Gary Brady
Austin, TX

"doc" wrote in message
...

I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.


--
doc
Chronos have them
www.chronos.ltd.uk
Look for item TR101
Martin

doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I
was informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.

You cam make one from a three-cornered file.
It takes some time and patience.
I have several but the best one is made by grinding one side in a curve.
This curve meets the two other (straight) sides in a point.
This makes a much more versatile tool.

Ken.

if you have a piece of hex stock, put a setscrew in the middle of one of the
flats and bore/drill a hole to fit the major od of the old file.
lock the file with the setscrew onto a flat side of the file. holding the
flat side of the hex down on the grinder rest, stroke the file across the
face of the grinding wheel. rotate every other flat until the ground edges
start to meet.
I prefer a slight curve at the front of my scraper / burr knife but our tool
maker prefers the front end of his just on some kind of angle because of the
life he gets grinding it that way. I have made them also with the shank of
old drills that are large enough.

"doc" wrote in message
...

I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.


--
doc

Also called a bearing scraper. I got one locally, german made, $15; wood
handle falls off, tho.
If Gary's MSC items are similar, indeed, stock up!!
----------------------------
Mr. P.V.'d
formerly Droll Troll
"doc" wrote in message
...

I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.


--
doc

On Mon, 19 Sep 2005 17:41:14 -0700, "Ken Davey"
wrote:

doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I
was informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.

You cam make one from a three-cornered file.
It takes some time and patience.
I have several but the best one is made by grinding one side in a curve.
This curve meets the two other (straight) sides in a point.
This makes a much more versatile tool.

Ken.

IIRC this is also known as a bearing scraper - at least that's what I
bought from Pascal Hardware about 25 years ago ($1.49)
Gerry :-)}
London, Canada

doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.


You can make one with a steady hand and some patience at the grinder.
You just don't want to let it get any hotter than you can comfortably
hold, so lots of dipping it in water to keep it cool. If you are
comfortable with basic heat treating, just grind the heck out of it and
reharden after the fact.

Any machine tool supplier that stock deburring tool sets will have
them as well, in smaller sizes, anyway. The Shaviv brand kit in my
toolbox has two triangular tips, one about 1/8" across the flat, the
other about 1/4".

Cheers
Trevor Jones

The scraper if it is the same one - is a sheet of metal that is a triangle -
each edge is made a scraper. The center is then screwed into a long handle.
I've never seen a long one. Would think it hard to use.

I suppose you could grind down the faces if you could hold it somehow.

Martin

Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH, NRA Life
NRA Second Amendment Task Force Charter Founder



doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

MSC has them called machinist scrapers triangle.
# 05844105 $2.67 in 99 catolog..
I have made them out of triangle files .
"doc" wrote in message
...

I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.


--
doc

doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.



I don't know where to get them in the UK, but I know several places in
Germany where you can get them.

Karl Fischer GmbH in Pforzheim (terrible web site design, and only in
German too(http://www.fischer-pforzheim.de/intro.htm

The entire catalogue is online at
http://www.fischer-pforzheim.de/PDF-...atalog2005.pdf

The scraper (called Hohlschaber or Dreikantschaber in German) can be
found on page 75 of the PDF file (page 91 of 346 of the print catalogue)

You can order a print catalogue he
http://www.fischer-pforzheim.de/forms/kontakt.php

Another company that will have this tool is Schmalz, also in Pforzheim.
http://www.j-schmalz.de/ Another extremely poorly implemented web
site. These German companies just don't get the Net. No matter what
language you choose on this site, when you click on catalogue, the
catalogue page appears for a fraction of a second, and then defaults to
a rather pathetic online order catalogue of just a handful of tools.

I guess you'd have to email them, if you want a catalogue from them

This kind of scraper is a commonly used tool by goldsmiths. I have
several, and use them daily to remove burs etc.

I have made several from triangular hand files also. Do not use a
grinding wheel to take off the teeth of the file, but rather a
stationary belt sander. Fast and precise.

Abrasha
http://www.abrasha.com

Jeweler supply house.
Karl

"doc" wrote in message
...

I have need of an old tool called a 3 cornered scaper. It is at first
sight, similar to a triangular file, with no teeth. Does anybody know
of a place in the UK where one can be purchased? Or failing that, I was
informed that such an implement can be manufactured from an
afformentioned triangular file, with the teeth ground off it by a
grinding wheel, and three fine edges left on it. Does anyone have any
experience of this.


--
doc

Gerald Miller wrote:
On Mon, 19 Sep 2005 17:41:14 -0700, "Ken Davey"
wrote:

doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at
first sight, similar to a triangular file, with no teeth. Does
anybody know of a place in the UK where one can be purchased? Or
failing that, I was informed that such an implement can be
manufactured from an afformentioned triangular file, with the teeth
ground off it by a grinding wheel, and three fine edges left on it.
Does anyone have any experience of this.

You cam make one from a three-cornered file.
It takes some time and patience.
I have several but the best one is made by grinding one side in a
curve. This curve meets the two other (straight) sides in a point.
This makes a much more versatile tool.

Ken.

IIRC this is also known as a bearing scraper - at least that's what I
bought from Pascal Hardware about 25 years ago ($1.49)
Gerry :-)}
London, Canada

I just caught up with your post Garry.
A bearing scraper (at least the ones I have seen) have all three sides
gently curved.
My design has two sides as straight as I can get them with the third side
curved (rather sharply) to meet the other two in a sharp point.
This allows the tool to get into an internal shoulder as well.
I don't know how many times I have stabbed myself on the point of this tool
but it also lends itself for use as a scriber in a pinch.

Regards.
Ken.

Hi,
The tool is pretty common in brass musical instrument repair. Ferrees
music here in the US can mail you one. They are on the web somewhere. I
just picked up one at a hardware store that was closing... mine was made in
china so if you have any of the stores there that sell Chinese tools you
might find one.

LB

"Ken Davey" wrote in message
...
Gerald Miller wrote:
On Mon, 19 Sep 2005 17:41:14 -0700, "Ken Davey"
wrote:

doc wrote:
I have need of an old tool called a 3 cornered scaper. It is at
first sight, similar to a triangular file, with no teeth. Does
anybody know of a place in the UK where one can be purchased? Or
failing that, I was informed that such an implement can be
manufactured from an afformentioned triangular file, with the teeth
ground off it by a grinding wheel, and three fine edges left on it.
Does anyone have any experience of this.

You cam make one from a three-cornered file.
It takes some time and patience.
I have several but the best one is made by grinding one side in a
curve. This curve meets the two other (straight) sides in a point.
This makes a much more versatile tool.

Ken.

IIRC this is also known as a bearing scraper - at least that's what I
bought from Pascal Hardware about 25 years ago ($1.49)
Gerry :-)}
London, Canada

I just caught up with your post Garry.
A bearing scraper (at least the ones I have seen) have all three sides
gently curved.
My design has two sides as straight as I can get them with the third side
curved (rather sharply) to meet the other two in a sharp point.
This allows the tool to get into an internal shoulder as well.
I don't know how many times I have stabbed myself on the point of this
tool
but it also lends itself for use as a scriber in a pinch.

Regards.
Ken.