Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Clausing lathe oil
What are the current lubricants to replace the following ones for the
Clausing 5900-series engine lathe? Texaco Way Lubricant "D" Texaco Regal PC-R&O oil Texaco Regal Oil G |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Clausing lathe oil
For the PC-R & O oil the cross reference is shell turbo t68 oil.I
get it from Golden Gate Petroleum for 46.00 for 5 gallons 1800-640-4311 |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Clausing lathe oil
I actually had to buy it myself.Shoot me an email and I will sell ya
some if ya |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Clausing lathe oil
On Fri, 23 Dec 2005 12:03:17 GMT, lid
(TEAMGREEN) wrote: For the PC-R & O oil the cross reference is shell turbo t68 oil.I get it from Golden Gate Petroleum for 46.00 for 5 gallons 1800-640-4311 Go to your nearest power station, they tend to use about 3000 gallons per 650MW turbine :-) Mark Rand RTFM |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for Info on Clausing lathe | Metalworking | |||
SB Heavy 10 Vs. Clausing 5914 Lathe | Metalworking | |||
$850 for Clausing 8530 mill + Clausing 2' lathe? | Metalworking | |||
Pictures of Clausing 8530 mill and clausing lathe! | Metalworking | |||
Clausing Lathe, but OT | Metalworking |