I have an Accu rite DRO on my 9X42 thi is a two axis model. The problem is
that some of the keys do not work and I have found that there is bad contact
between the etched ribbon connector that goes from the keyboard to the
circuit board. This has a connector that is called an amp trio mate. Now
no one out there is willing to sell me one or two pieces but rather a min of
480 pcs at .25 cents a piece. anybody know where I should go looking for
such components. I have a surplus place about 50 minutes drive, I'd rather
just order the specific product I need pay S+H and get it.
thanks,
JOhn

Try Newark Electronics and/or Resource Electronics
LLoyd

"John" wrote in message
nk.net...
I have an Accu rite DRO on my 9X42 thi is a two axis model. The problem is
that some of the keys do not work and I have found that there is bad
contact between the etched ribbon connector that goes from the keyboard to
the circuit board. This has a connector that is called an amp trio mate.
Now no one out there is willing to sell me one or two pieces but rather a
min of 480 pcs at .25 cents a piece. anybody know where I should go
looking for such components. I have a surplus place about 50 minutes
drive, I'd rather just order the specific product I need pay S+H and get
it.
thanks,
JOhn

Have you tried Accurite? I got their number by asking J&L for it. Bet MSC
will have it also. Accurite gave me the best tech service I HAVE EVER HAD!
GREAT PEOPLE.

Karl


"John" wrote in message
nk.net...
I have an Accu rite DRO on my 9X42 thi is a two axis model. The problem is
that some of the keys do not work and I have found that there is bad
contact between the etched ribbon connector that goes from the keyboard to
the circuit board. This has a connector that is called an amp trio mate.
Now no one out there is willing to sell me one or two pieces but rather a
min of 480 pcs at .25 cents a piece. anybody know where I should go
looking for such components. I have a surplus place about 50 minutes
drive, I'd rather just order the specific product I need pay S+H and get
it.
thanks,
JOhn

I've found that some online catalogs are difficult to locate certain parts,
particularly connectors. Sizes, separate terminals etc.

If you can't find the connector quickly, you could just use ribbon cable to
replace the flex circuit. Strip and solder at both ends, keeping the same
orientation of the original connectors/connections.
This will work well for low voltage signal cables that don't need to move
constantly (like CD or scanner heads).

WB
..............

"John" wrote in message
nk.net...
I have an Accu rite DRO on my 9X42 thi is a two axis model. The problem
is
that some of the keys do not work and I have found that there is bad
contact
between the etched ribbon connector that goes from the keyboard to the
circuit board. This has a connector that is called an amp trio mate.
Now
no one out there is willing to sell me one or two pieces but rather a min
of
480 pcs at .25 cents a piece. anybody know where I should go looking for
such components. I have a surplus place about 50 minutes drive, I'd
rather
just order the specific product I need pay S+H and get it.
thanks,
JOhn






----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----