Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Accu rite DRO problem
I have an Accu rite DRO on my 9X42 thi is a two axis model. The problem is
that some of the keys do not work and I have found that there is bad contact between the etched ribbon connector that goes from the keyboard to the circuit board. This has a connector that is called an amp trio mate. Now no one out there is willing to sell me one or two pieces but rather a min of 480 pcs at .25 cents a piece. anybody know where I should go looking for such components. I have a surplus place about 50 minutes drive, I'd rather just order the specific product I need pay S+H and get it. thanks, JOhn |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Outside drain problem... Who is responsible? | UK diy | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |