Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Deck Repair Help
My wife and I bought a house about 1 year ago. The previous owners, did nothing for the up keep of the house. The board of the deck appear to be warped. They have some splits in them, and the wood appears to have ripples in it, for lack of a better word. If you run your hand over a board, its all bumpy. I tried to hand sand this,but this would take forever. Would I be wasting my time trying to sand all this, or should I just bite the bullet and replace all the boards? |
#2
|
|||
|
|||
I'm not an expert...but would replace them with pressure treated boards. Use
deck screws to secure them. "Tony Lisanti" wrote in message ... My wife and I bought a house about 1 year ago. The previous owners, did nothing for the up keep of the house. The board of the deck appear to be warped. They have some splits in them, and the wood appears to have ripples in it, for lack of a better word. If you run your hand over a board, its all bumpy. I tried to hand sand this,but this would take forever. Would I be wasting my time trying to sand all this, or should I just bite the bullet and replace all the boards? |
#3
|
|||
|
|||
On Sun, 20 Mar 2005 18:53:48 -0500, Tony Lisanti
wrote: My wife and I bought a house about 1 year ago. The previous owners, did nothing for the up keep of the house. The board of the deck appear to be warped. They have some splits in them, and the wood appears to have ripples in it, for lack of a better word. If you run your hand over a board, its all bumpy. I tried to hand sand this,but this would take forever. Would I be wasting my time trying to sand all this, or should I just bite the bullet and replace all the boards? ============= I would pull out a small electric planer before I would take a sander to the boards...just a lot faster... But without seeing the decking it is realy impossible to say....decking is not really expesive so it depends on just how many boards are warped....or.. spliting Bob Griffiths |
#4
|
|||
|
|||
"Bob G" wrote in message ... On Sun, 20 Mar 2005 18:53:48 -0500, Tony Lisanti wrote: My wife and I bought a house about 1 year ago. The previous owners, did nothing for the up keep of the house. The board of the deck appear to be warped. They have some splits in them, and the wood appears to have ripples in it, for lack of a better word. If you run your hand over a board, its all bumpy. I tried to hand sand this,but this would take forever. Would I be wasting my time trying to sand all this, or should I just bite the bullet and replace all the boards? ============= I would pull out a small electric planer before I would take a sander to the boards...just a lot faster... yep its a lot faster untill you immediatly hit a nail. making it useless But without seeing the decking it is realy impossible to say....decking is not really expesive so it depends on just how many boards are warped....or.. spliting Bob Griffiths |
#5
|
|||
|
|||
Tony,
Pull a few of the worst boards and flip them over. Is this face less bumpy? If they are badly split or really warped you'll need to replace them. Cabot's deck stain is a good product. Dave M. |
#6
|
|||
|
|||
I would pull out a small electric planer before I would take a sander to the boards...just a lot faster... yep its a lot faster untill you immediatly hit a nail. making it useless ==================== Sometimes I have to wonder IF I engaged my brain before I posted a reply.... You of course are 100 percent correct... My deck is held in place with deck screws that are countersunk BUT I woild still have to be careful IF I took out the planer and went at it I have to check the time stamp on my original message...I had to be either still asleep or in bad need of going to bed.... Bob Griffiths |
#7
|
|||
|
|||
Mine are counter sunk too some appear to be screws, others appear to be nails. I think the guy who did this must have been drunk or something. The railing is put together so poorly its not funny. The guy even posted a little metal sign on the fence. I tried to call it, but he's our of business. Not surprising at all. Perhaps I should post a picture or two on this disaster I have here? On Mon, 21 Mar 2005 13:32:52 -0500, Bob G. wrote: I would pull out a small electric planer before I would take a sander to the boards...just a lot faster... yep its a lot faster untill you immediatly hit a nail. making it useless ==================== Sometimes I have to wonder IF I engaged my brain before I posted a reply.... You of course are 100 percent correct... My deck is held in place with deck screws that are countersunk BUT I woild still have to be careful IF I took out the planer and went at it I have to check the time stamp on my original message...I had to be either still asleep or in bad need of going to bed.... Bob Griffiths |
#8
|
|||
|
|||
On Mon, 21 Mar 2005 21:25:48 -0500, Tony Lisanti
wrote: Mine are counter sunk too some appear to be screws, others appear to be nails. I think the guy who did this must have been drunk or something. The railing is put together so poorly its not funny. The guy even posted a little metal sign on the fence. I tried to call it, but he's our of business. Not surprising at all. Perhaps I should post a picture or two on this disaster I have here? On Mon, 21 Mar 2005 13:32:52 -0500, Bob G. wrote: I would pull out a small electric planer before I would take a sander to the boards...just a lot faster... yep its a lot faster untill you immediatly hit a nail. making it useless ==================== Sometimes I have to wonder IF I engaged my brain before I posted a reply.... You of course are 100 percent correct... My deck is held in place with deck screws that are countersunk BUT I woild still have to be careful IF I took out the planer and went at it I have to check the time stamp on my original message...I had to be either still asleep or in bad need of going to bed.... Bob Griffiths Any idea how old the deck is? It sounds like it has just been beat to death by the sun. You could try flipping the boards as suggested, but if that doesn't work think about just replacing the decking. Note that modern treated wood is treated with copper and you'll have to be careful to choose the right fasteners or they'll react to the copper and corrode. Sanding might be an option, but I don't think I'd want to sand arsenic treated wood myself. |
#9
|
|||
|
|||
I think its no more then 7 years old. What I don't understand is how it got so bad. There isn't much sunlight in this area, as trees from the cemetery shade this side of the house. I think it was cheap wood. There was a little aluminum sign on the one side of the fence when I moved in, and I tried to call the phone number. It's disconnected now. I guess the company went under. I did start to sand the wood, before I heard this type of wood was treated with arsenic. I don't want to continue sanding knowing that now. On Mon, 21 Mar 2005 22:30:07 -0500, John/Charleston wrote: On Mon, 21 Mar 2005 21:25:48 -0500, Tony Lisanti wrote: Mine are counter sunk too some appear to be screws, others appear to be nails. I think the guy who did this must have been drunk or something. The railing is put together so poorly its not funny. The guy even posted a little metal sign on the fence. I tried to call it, but he's our of business. Not surprising at all. Perhaps I should post a picture or two on this disaster I have here? On Mon, 21 Mar 2005 13:32:52 -0500, Bob G. wrote: I would pull out a small electric planer before I would take a sander to the boards...just a lot faster... yep its a lot faster untill you immediatly hit a nail. making it useless ==================== Sometimes I have to wonder IF I engaged my brain before I posted a reply.... You of course are 100 percent correct... My deck is held in place with deck screws that are countersunk BUT I woild still have to be careful IF I took out the planer and went at it I have to check the time stamp on my original message...I had to be either still asleep or in bad need of going to bed.... Bob Griffiths Any idea how old the deck is? It sounds like it has just been beat to death by the sun. You could try flipping the boards as suggested, but if that doesn't work think about just replacing the decking. Note that modern treated wood is treated with copper and you'll have to be careful to choose the right fasteners or they'll react to the copper and corrode. Sanding might be an option, but I don't think I'd want to sand arsenic treated wood myself. |
#10
|
|||
|
|||
It does sound kind of odd but I can't guess much more sight unseen.
It might not even be treated wood after all. Is the structure under the decking sound? On Tue, 22 Mar 2005 21:06:16 -0500, Tony Lisanti wrote: I think its no more then 7 years old. What I don't understand is how it got so bad. There isn't much sunlight in this area, as trees from the cemetery shade this side of the house. I think it was cheap wood. There was a little aluminum sign on the one side of the fence when I moved in, and I tried to call the phone number. It's disconnected now. I guess the company went under. I did start to sand the wood, before I heard this type of wood was treated with arsenic. I don't want to continue sanding knowing that now. On Mon, 21 Mar 2005 22:30:07 -0500, John/Charleston wrote: On Mon, 21 Mar 2005 21:25:48 -0500, Tony Lisanti wrote: Mine are counter sunk too some appear to be screws, others appear to be nails. I think the guy who did this must have been drunk or something. The railing is put together so poorly its not funny. The guy even posted a little metal sign on the fence. I tried to call it, but he's our of business. Not surprising at all. Perhaps I should post a picture or two on this disaster I have here? On Mon, 21 Mar 2005 13:32:52 -0500, Bob G. wrote: I would pull out a small electric planer before I would take a sander to the boards...just a lot faster... yep its a lot faster untill you immediatly hit a nail. making it useless ==================== Sometimes I have to wonder IF I engaged my brain before I posted a reply.... You of course are 100 percent correct... My deck is held in place with deck screws that are countersunk BUT I woild still have to be careful IF I took out the planer and went at it I have to check the time stamp on my original message...I had to be either still asleep or in bad need of going to bed.... Bob Griffiths Any idea how old the deck is? It sounds like it has just been beat to death by the sun. You could try flipping the boards as suggested, but if that doesn't work think about just replacing the decking. Note that modern treated wood is treated with copper and you'll have to be careful to choose the right fasteners or they'll react to the copper and corrode. Sanding might be an option, but I don't think I'd want to sand arsenic treated wood myself. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Securing a 2nd floor deck | Home Repair | |||
buiding a deck questi | Home Repair | |||
Deck disasater - how to repair concrete posts? | Woodworking | |||
TC-WE435 Tape Deck Door Repair | Electronics Repair | |||
Rusted mower deck, Need ideas on repair | Home Repair |