I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E

"Erin" wrote in message
...

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

I think any manufacturer can custom make any size you want. Try:

http://www.peachtreedoor.com/#

or

http://www.pella.com

"Erin" wrote

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E

Double check your on center b/4 you order or buy a window. 14" O.C. is a
bit unusual, usually studs are 16" or 24" O.C. Which would leave a opening
of 14-1/2" & 22-1/2" respectively. Do allow room to shim & square up window
in the opening, usually you deduct 1/2" from opening to allow for this.

"Erin" wrote


Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

It can be done fairly easily. Most building supply houses stock the most
common sizes but most will order what you need. Check with a couple of
dealers about special order window. They can be made most any size. There
are many styles and types to consider. Do you want it to open? Some of the
crank out styles will give almost 100% opening.

Probably best to just mount non-moveable panes. By the time you get a
window frame with openable panes, there will be almost no glass in
them. As some one else said, your spacing is probably 16" OC.
Harry K

If they don't need to open, there's always glass blocks.


"Erin" wrote in message
...

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E

I have a few of the small windows installed between 16 in center studs. Put
two of them side by side and it looks like one large window. Got 'em from a
mobilhome supply store online. They are like two storm windows each having
latches facing inward, aluminum for outside and white enamel for inside. The
outside window includes a screen. They have caulking tape and screws to
match but must be ordered as separate items. This is where I bought them:
http://store.yahoo.com/amhs/windows.html If you have a local mobilhome
supply store, check with them to get an idea of what they are.
Bob

"Erin" wrote in message
...

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E

rck wrote:
I have a few of the small windows installed between 16 in center studs. Put
two of them side by side and it looks like one large window. Got 'em from a
mobilhome supply store online. They are like two storm windows each having
latches facing inward, aluminum for outside and white enamel for inside. The
outside window includes a screen. They have caulking tape and screws to
match but must be ordered as separate items. This is where I bought them:
http://store.yahoo.com/amhs/windows.html If you have a local mobilhome
supply store, check with them to get an idea of what they are.
Bob

"Erin" wrote in message
...

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E




Hi,
RV windows are single pane. Aren't they?Not good for colder climate.
Tony

"Tony Hwang" wrote in message
news:RupCd.697060$%k.317645@pd7tw2no...
rck wrote:
I have a few of the small windows installed between 16 in center studs.
Put two of them side by side and it looks like one large window. Got 'em
from a mobilhome supply store online. They are like two storm windows
each having latches facing inward, aluminum for outside and white enamel
for inside. The outside window includes a screen. They have caulking tape
and screws to match but must be ordered as separate items. This is where
I bought them: http://store.yahoo.com/amhs/windows.html If you have a
local mobilhome supply store, check with them to get an idea of what they
are.
Bob

"Erin" wrote in message
...

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E




Hi,
RV windows are single pane. Aren't they?Not good for colder climate.
Tony

The windows I suggested are a set of two, one mounted on the outside of the
house and the other mounted on the inside wall. This gives a roughly 4 inch
space between which provides some insulation. Where I live it gets down to
zero or slightly below and I haven't had any problem. I'll agree it may not
be the ideal solution, but the OP put forth a problem that was somewhat out
of the ordinary. As the saying goes, necessity is a mother.

Bob

In article , Erin wrote:

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E


You could do this, but consider how narrow those windows will be after
installing casing & frame. It's not really that big a job to open a
wall and install headers & cripples for a larger window installation.


--

Larry Wasserman Baltimore, Maryland

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.

I can't think of any particular reason you couldn't mount solatubes
sideways,
except that they'd be ugly. And yes, you can have made windows that
will fit between the studs.

But it's not obvious to me that, once you've punched a hole in the
drywall and siding anyway, it's particularly more of a PITA to stick in
a header and double up studs. Especially if you have to put in more
than one little window to make up the difference.

wrote in message ...


But it's not obvious to me that, once you've punched a hole in the
drywall and siding anyway, it's particularly more of a PITA to stick in
a header and double up studs. Especially if you have to put in more
than one little window to make up the difference.


The point of the narrow window is that the studs would not have to be
doubled. Header for attaching, but since there is no bearing as a wide
window no additional structure would have to be added.

"Erin" wrote in message
...

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

Erin,

As for the expense and hassle of opening up and framing a conventional
window (e.g. removing a stud or two and building a weight bearing header,
etc.). I believe you'll find there's not a huge difference between what you
think is the easier project to put a window between existing studs vs. the
very common technique used to remove studs and place a weight bearing header
in an existing wall. A competent remodel carpenter won't see a lot of
difference in the two projects and you might really be surprised at how
cheap the labor portion of the project is. They do it all the time and do
it pretty darn quickly, efficiently and with little or no "collateral
damage". An incompetent DIY carpenter (such as myself!) would take longer
and more hassle than a pro, but again, not an awful lot longer than your
idea with some pre-planning and preparation In my opinion, well worth the
effort to get exactly the kind of window you like.

You need to add up all of the cost and hassle factors for your idea vs
larger opening w/ conventional header.

*Single, larger hole vs. multiple smaller holes

*Able to use a conventional, readily available window of exactly any width
and height you want (or better yet, a sale-priced closeout or surplus stock
window), vs. multiple smaller, possibly harder to get windows, likely to
have less options for dimensions and/or quality, possibly more expensive
than the conventional larger window when added up.

I don't know the answer but I encourage you to think about if you might be
seeking a false economy?

By the way, I believe a custom window shop could make you anything you
want - I'd try to find one and ask them about the narrow windows.

As for the stud spacing... I'm not saying it's impossible, but VERY unlikely
the studs are 14 inches on center. Standard stud spacing in the US is
either 16 or 24 inches OC. Maybe you're measuring the clear space between
the studs? 16 OC would yield approximately 14 1/2 inches clear space.
Another potential cause for confusion is if you're measuring stud spacing in
an area of the wall where it might in fact be irregular. Studs can be
irregularly spaced near corners, windows and doors. If you're using a stud
finder to determine stud spacing, some internal structures could mess also
that up. such as added blocking to accomodate fixtures or outlets, etc. etc.
Point being, unless there is something very odd about your house, the studs
are NOT 14 OC. and you should check that out very carefully.

If your studs are indeed irregular (14 OC), to me that's another point
towards building a conventional window opening.

Good luck

Cam

Cam

replying to Camilo, JL D wrote:
I have a similar issue. I cannot nor do I want to cut out studs to add a
window. So I plan to install 3 narrow windows beween joists for extra light in
my kitchen. An yes, any light is better than none. By adding decorative
moldings on the outside of the 3 windows, it can absolutely look like one big
window. (I did this once before amny years ago.) Adding 2 single pane windows
for insulation is the same idea of adding interior storms to windows in an
older house- a good solution if budget doesn't allow ordering special sizes.
GO for it and don't listen to naysayers.

--
for full context, visit https://www.homeownershub.com/mainte...ds-581457-.htm

On Thu, 14 Dec 2017 15:44:02 GMT, JL D
m wrote:

replying to Camilo, JL D wrote:
I have a similar issue. I cannot nor do I want to cut out studs to add a
window. So I plan to install 3 narrow windows beween joists for extra light in
my kitchen. An yes, any light is better than none. By adding decorative
moldings on the outside of the 3 windows, it can absolutely look like one big
window. (I did this once before amny years ago.) Adding 2 single pane windows
for insulation is the same idea of adding interior storms to windows in an
older house- a good solution if budget doesn't allow ordering special sizes.
GO for it and don't listen to naysayers.

It may look like the windows in a prison. If you start with a 14.5"
stud bay and add another 3" or so of bucking and frame, you end up
with 11.5" or less of glass.

On Thursday, December 14, 2017 at 11:16:10 AM UTC-5, wrote:
On Thu, 14 Dec 2017 15:44:02 GMT, JL D
m wrote:

replying to Camilo, JL D wrote:
I have a similar issue. I cannot nor do I want to cut out studs to add a
window. So I plan to install 3 narrow windows beween joists for extra light in
my kitchen. An yes, any light is better than none. By adding decorative
moldings on the outside of the 3 windows, it can absolutely look like one big
window. (I did this once before amny years ago.) Adding 2 single pane windows
for insulation is the same idea of adding interior storms to windows in an
older house- a good solution if budget doesn't allow ordering special sizes.
GO for it and don't listen to naysayers.

It may look like the windows in a prison. If you start with a 14.5"
stud bay and add another 3" or so of bucking and frame, you end up
with 11.5" or less of glass.

And what's the big deal with cutting out the studs? You have to cut an
opening all way through to the outside regardless. I don't see cutting
through a couple studs being a big deal. Other than that, the work is
similar, except tt's actually more work to do 3 small ones, than one
larger one. You need to frame and finish 3 openings instead of one.

On Thu, 14 Dec 2017 08:59:27 -0800 (PST), trader_4
wrote:

I don't see cutting
through a couple studs being a big deal.

As long as you can hold up the roof until you build the header and sit
it on king posts. You get a break under a gable but still not enough
to bet you won't crack drywall.

JL D posted for all of us...



replying to Camilo, JL D wrote:
I have a similar issue. I cannot nor do I want to cut out studs to add a
window. So I plan to install 3 narrow windows beween joists for extra light in
my kitchen. An yes, any light is better than none. By adding decorative
moldings on the outside of the 3 windows, it can absolutely look like one big
window. (I did this once before amny years ago.) Adding 2 single pane windows
for insulation is the same idea of adding interior storms to windows in an
older house- a good solution if budget doesn't allow ordering special sizes.
GO for it and don't listen to naysayers.

--
for full context, visit https://www.homeownershub.com/mainte...ds-581457-.htm

Only from HomeMoanersHelpless.

--
Tekkie

Milgard will make windows whatever dimensions at no up charge - or at least
they used to when I did it 5 years ago. Installed 12 12x12inch windows in a
W pattern across adjoining walls - interesting effect - great light - little
heat gain/loss.

--
______________________
Claudia
Totus Tuus
"Erin" wrote in message
...

I'm looking to add light to a room.

It will cost a bit to open up the wall to reframe it for windows.

Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?

The studs are 14" on center.

I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.


Thanks,

-E

replying to Erin, Geometrics Windows wrote:
ErinH wrote:

I'm looking to add light to a room.
It will cost a bit to open up the wall to reframe it for windows.
Does anyone sell windows that I can just put inbetween the studs with a
short section of 2x4 above and below to frame it in?
The studs are 14" on center.
I know they'd be small, but if I put a lot of them in, it seems like the
end result would be fine.
Thanks,
-E


I know your search for between the studs windows was many years ago,
however, if by chance you're still in the market we have between the studs
windows! Please visit our website: www.geometricswindowscom or feel free
to contact me toll free: 855-809-7179

--