Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
No
 
Posts: n/a
Default High efficiency furnace - water out of outside pipe

Hi,

I recently had High Efficiency furnace installed (Carrier Infinity) and
there were 2 PVC pipes put outside my house - one is for taking air into
furnace and another one for air out of furnace. When furnace is working, my
second pipe is spraying water out of it - not a lot, but still hand feels
wet if you hold up to it. It seems kind of strange. Is that a good furnace
installation? Should it be like that? If yes, then would it not freeze in
the winter?

Thanks


  #2   Report Post  
MLD
 
Posts: n/a
Default

I know at times that the vent pipe does show some signs of water droplets
near the end of the pipe. I take this to mean that not all of the moisture
has been removed from the exhaust air of the furnace and as such condenses
near the end of the pipe. As far was water spraying, haven't seen that. Is
your condensate pump system working because that is where all the moisture
should end up. BTW, look at the way the pipes are installed, they should be
in a slight angle up towards the outside.
MLD
"No" wrote in message ...
Hi,

I recently had High Efficiency furnace installed (Carrier Infinity) and
there were 2 PVC pipes put outside my house - one is for taking air into
furnace and another one for air out of furnace. When furnace is working,

my
second pipe is spraying water out of it - not a lot, but still hand feels
wet if you hold up to it. It seems kind of strange. Is that a good furnace
installation? Should it be like that? If yes, then would it not freeze in
the winter?

Thanks




  #3   Report Post  
James Owens
 
Posts: n/a
Default


Our high-efficiency furnace develops an icicle stalagmite below the
exhaust pipe in winter. We have to knock it down around February to
prevent it from enveloping the pipe.



"No" ) writes:
Hi,

I recently had High Efficiency furnace installed (Carrier Infinity) and
there were 2 PVC pipes put outside my house - one is for taking air into
furnace and another one for air out of furnace. When furnace is working, my
second pipe is spraying water out of it - not a lot, but still hand feels
wet if you hold up to it. It seems kind of strange. Is that a good furnace
installation? Should it be like that? If yes, then would it not freeze in
the winter?

Thanks




--
"For it is only of the new one grows tired. Of the old one never tires."
-- Kierkegaard, _Repetition_

James Owens, Ottawa, Canada
  #4   Report Post  
TURTLE
 
Posts: n/a
Default


"No" wrote in message ...
Hi,

I recently had High Efficiency furnace installed (Carrier Infinity) and there
were 2 PVC pipes put outside my house - one is for taking air into furnace and
another one for air out of furnace. When furnace is working, my second pipe is
spraying water out of it - not a lot, but still hand feels wet if you hold up
to it. It seems kind of strange. Is that a good furnace installation? Should
it be like that? If yes, then would it not freeze in the winter?

Thanks


This is Turtle.

The vapor being very moist is normal and is working fine. These vapors was at
2,000ºF when it was in the furnace but the furnace takes so much of the heat out
of the vapors that it makes water drop out of the vapors and will be sometimes
at about 80ºF or so.

Now i have rarely ever seen the vapor close off the pipe but have seen a good
amount of ice from where they drip off the end of the pipe.

TURTLE


  #5   Report Post  
BGBevill
 
Posts: n/a
Default

"No" wrote in message ...
Hi,

I recently had High Efficiency furnace installed (Carrier Infinity) and

there
were 2 PVC pipes put outside my house - one is for taking air into furnace

and
another one for air out of furnace. When furnace is working, my second pipe

is
spraying water out of it - not a lot, but still hand feels wet if you hold

up
to it. It seems kind of strange. Is that a good furnace installation?

Should
it be like that? If yes, then would it not freeze in the winter?

Thanks


This is Turtle.

The vapor being very moist is normal and is working fine. These vapors was at

2,000ºF when it was in the furnace but the furnace takes so much of the heat
out
of the vapors that it makes water drop out of the vapors and will be
sometimes
at about 80ºF or so.

Now i have rarely ever seen the vapor close off the pipe but have seen a good

amount of ice from where they drip off the end of the pipe.

TURTLE



Dang Turtle, didn't know it got that cold down there in your area....;-).
Yeah, the furnace seems to be fine. What you are seeing and/or feeling is
normal as Turtle said.

Bobby


  #6   Report Post  
m Ransley
 
Posts: n/a
Default

Some water vapor is normal, you say spraying water though. Im sure
Carrier can tell you how much is normal, an improperly angled exhaust
is possible as is maybe [ Im guessing ] improper furnace angle for
draining. My PVC exhaust does not freeze at - 20f and properly
instaled they should rarely freeze. Im sure they are used where it gets
to -60F. Water vapor is normal as 93% of the heat is removed and NG
contains allot of water. That is why you cannot vent HE furnaces
through an unlined chimney, water and acid will eat brick. If you
really drip water it may be of concern. Check the level of the exhaust
and call Carrier to see what they recommend and how to check things
out. Your furnace drains water from combustion, check that also.

  #7   Report Post  
TURTLE
 
Posts: n/a
Default


"BGBevill" wrote in message
...
"No" wrote in message ...
Hi,

I recently had High Efficiency furnace installed (Carrier Infinity) and

there
were 2 PVC pipes put outside my house - one is for taking air into furnace

and
another one for air out of furnace. When furnace is working, my second pipe

is
spraying water out of it - not a lot, but still hand feels wet if you hold

up
to it. It seems kind of strange. Is that a good furnace installation?

Should
it be like that? If yes, then would it not freeze in the winter?

Thanks


This is Turtle.

The vapor being very moist is normal and is working fine. These vapors was at

2,000ºF when it was in the furnace but the furnace takes so much of the heat
out
of the vapors that it makes water drop out of the vapors and will be
sometimes
at about 80ºF or so.

Now i have rarely ever seen the vapor close off the pipe but have seen a good

amount of ice from where they drip off the end of the pipe.

TURTLE



Dang Turtle, didn't know it got that cold down there in your area....;-).
Yeah, the furnace seems to be fine. What you are seeing and/or feeling is
normal as Turtle said.

Bobby


This is Turtle.

Yea, We have a weather forcaster that has stated that we may get some ice in the
water in the ditches along side the roads by Jan. or Feb.. It has been laterly
getting in the 80's and 90's during the day and 70's at nite. Everybody will
crank up there heating furnaces to see if the work a little before Christmas
before the winter sets in. I try to get all my customers to do this at Thank
Giving to be a head of the game.

TURTLE


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat banks (again!) Dave UK diy 148 September 6th 04 08:45 PM
Ohmwork [email protected] Home Repair 36 July 24th 04 12:22 AM
need hot water FAST PV Home Repair 38 January 30th 04 01:15 AM
NO MORE hot water problems [email protected] Home Repair 9 January 29th 04 06:15 PM
Thankless or Tankless hot water heaters [email protected] Home Repair 6 January 29th 04 03:01 AM


All times are GMT +1. The time now is 06:06 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"