Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#17
![]()
Posted to alt.home.repair
|
|||
|
|||
![]()
On Monday, May 24, 2021 at 10:11:59 PM UTC-4, Ed Pawlowski wrote:
On 5/24/2021 8:16 PM, DerbyDad03 wrote: I control my Nest thermostat with my smartphone via the Nest app or with my voice via my Echo Dot(s). The smartphone app works from anywhere. I have 4 Dots, so that method works from anywhere in my house and garage. Alexa, set the temperature to ___ degrees. Alexa, increase/decrease the temperature. (changes by 2°F) Alexa, increase/decrease the temperature by ___ degrees. Alexa, turn the thermostat off. Basically, anything that can be set at the thermostat can be set by the Nest app on my phone, including the schedule. The Alexa method is a more limited. It didn't/doesn't cost me anything. I paid $35 for the Nest through my utility and I've gotten well over $35 in credits applied to my bill by participating in "set-back" periods during times of high AC usage. I already had the Echo Dots for other reasons, so all I had to do was add the (free) Nest skill. Not a bad deal. I'd do that if offered, I have two Dots. I just don't have the incentive to spend $100 when it is so easy for me to change it with a couple of tops. I assume you mean "taps". It's easy for me to change mine with a couple of taps also. Thing is, my taps are on the smartphone that sitting on the nightstand, while I'm still cozy in bed. Even easier is using the whisper mode on my bedroom Dot. Me whispering: Alexa...raise the temperature Alexa whispering back: The temperature is set to 72 In my last house I had two programmable T-stats and rarely changed the program. Overall worked well. I'm on one level now. I don't ever change the *program* but I do change the temperature. Using Eco-mode for vacations is easier than reprogramming to single temp all the time, but not as economical. That's the one drawback of a Nest stat - no Hold mode. I don't understand why. How hard can it be to add that feature to the software? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Sharp TV / VCR Remote Codes - GE Universal Remote | Electronics Repair | |||
can't get MX-500 universal remote to work with Directv H20 remote | Electronics Repair | |||
tx-29gf10x remote how do you open this remote | Electronics Repair | |||
remote control | UK diy | |||
TV Remote Control rubber pad(UR50CT1071) used in remote control for Panasonic TV Model TX-29GF10X | Electronics Repair |