Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
vibration after motor change
We recently had a motor replaced on our Lennox G61MVP series central air
system. My wife called me while they were change the motor as I wasn't able to be there. They had the wrong puller for the job, so they used a block of wood to drive the motor off the squirrel cage.She offered to let them use one of my pullers, ( I have several from my auto repair and welding business ) but they declined and spent the next 45 minutes beating on it with a hammer. The first thing I noticed when I got home was the whirring noise and the vibration when you put your hand on the unit itself. I pulled the front panel and and checked the new motor for slop in the bearings, they were tight. there is however about 5 to 10 thousands end play on it and when I spun the squirrel cage, there is about 1/4 to 3/8 inch run out. Since I don't know and can't find allowable tolerances anywhere can someone please advise me. Are either of this tolerances to much ? The squirrel cage isn't dragging, but my experience with automotive is if you bend or warp the squirrel cage causing it to unbalance, it will cause premature bearing failure. Is this a concern on this unit also? Please advise, Thanks -- for full context, visit https://www.homeownershub.com/mainte...e-1122081-.htm |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT - Scared Scientists: The Moving Portraits Which Will Change Forever Your Views on Climate Change | UK diy | |||
Vibration of motor on a horiz. compressor | Metalworking | |||
Should I change to 1 PH motor or by converter for 3 ph motor | Metalworking | |||
How Change I Change the Color of Metal Roof Flashing? | Home Repair | |||
How to change a Dyson DC07 Post Motor Filter | UK diy |