Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Microwave Temp Cutouts: KSD201 vs KSD301 ??
My second GE Sensor Microwave oven just bit the big one.
This time, I had enough sense to check the fuses and thermostats. Sure enough, found something at the top inside the case called a "KSD201/PPS"... it's a normally-closed cutout switch that opens up/cuts out at 120F. Resistance test = infinite ohms, jumper around it and the oven works. But trying to find a replacement is not going well. OTOH, I come up with a lot of KSD301.... hits and, besides looking the same, the spec seems tb the same (cutout @120F). Are these two interchangeable, or am I missing something? -- Pete Cresswell |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Make round cutouts in screens... | Metalworking | |||
Thermal cutouts | UK diy | |||
Hinge cutouts | Home Repair | |||
Kenmore Wall Mounted Oven / Microwave Combo Temp Sensor | Home Repair | |||
Built-in microwave oven temp sensor | Home Repair |