Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]() "CMF" wrote in message ... After 9 years, my metal garage door is rather tight. I can close it manually alright by pulling down, but when the GDO is pushing it, it reaches a point, sticks, bows up the screw and rail for the screw, and returns. This may have to do with the dry summer, a little settling, I don't know. I want to try lubricating a little, but seem to remember this is a general no-no, but I remember a post that suggested wax or something in the rails for the wheels? If not wax, what can I use to smooth it up a little to get it hopefully over the hump? I plan to get a garage door company out at some point to fix them up in general (we have two single car doors, actually) but need an interum plan until I actually see money again. I have used parafin wax (the type used for sealing jelly and jam in glass jars) for years. I apply it to the edges of the doors and the door jam. Usually once a year is adequate. I've never lubricated the skate wheels or the guides. Regards, John |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Sears Craftman garage door opener won't close anymore | Electronics Repair | |||
Garage door opener for side hung doors. | UK diy | |||
Garage Opener Install - limited length from wall to beam | Home Repair | |||
Question on garage door opener | Home Repair |