I need to buy a few tubing fittings similar to those shown in this photo, but my search for them is
considerably hampered by not knowing what they're called. Any help would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one tube and the side of
another, by attaching with a screw.

Doug Miller fired this volley in
:

http://milmac.com/images/TubingFittings.png

Those are not "tube fittings". They're mechanical adaptors that are
probably custom-made by the company making the chair/table/tent/whatever
into which they assemble.

They are called "plastic aluminum tube joiners".

What were they part of? The manufacturer of the original device is
probably the best source for them.

Lloyd

"Doug Miller" wrote in message
...
I need to buy a few tubing fittings similar to those shown in this
photo, but my search for them is
considerably hampered by not knowing what they're called. Any help
would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one
tube and the side of
another, by attaching with a screw.

I've never seen a name for them. It looks like something from a
medical mobility assistance device.

For temporary use would chain link fence post tee joint clamps work?
The smallest size is 1.315" top rail, called "1-3/8."

A fence company would have a much better selection than the big-box
stores.

-jsw

"Doug Miller" wrote in message
...
I need to buy a few tubing fittings similar to those shown in this
photo, but my search for them is
considerably hampered by not knowing what they're called. Any help
would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one
tube and the side of
another, by attaching with a screw.

You could make one similar to a diagonally split bicycle handlebar
stem:
-jsw

On Sat, 9 Aug 2014 12:30:48 -0400, "Jim Wilkins"
wrote:

"Doug Miller" wrote in message
.. .
I need to buy a few tubing fittings similar to those shown in this
photo, but my search for them is
considerably hampered by not knowing what they're called. Any help
would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one
tube and the side of
another, by attaching with a screw.

You could make one similar to a diagonally split bicycle handlebar
stem:
-jsw

Easy enough to make with a milling machine or drill press. Nylon bar
stock, drill the peice in half to form the coped end, then drill and
tap center.

On 10-Aug-14 2:13 AM, wrote:
On Sat, 9 Aug 2014 12:30:48 -0400, "Jim Wilkins"
wrote:

"Doug Miller" wrote in message
...
I need to buy a few tubing fittings similar to those shown in this
photo, but my search for them is
considerably hampered by not knowing what they're called. Any help
would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one
tube and the side of
another, by attaching with a screw.

You could make one similar to a diagonally split bicycle handlebar
stem:
-jsw

Easy enough to make with a milling machine or drill press. Nylon bar
stock, drill the peice in half to form the coped end, then drill and
tap center.



Or use neoprene rubber "well nuts"

On 09/08/14 16:57, Doug Miller wrote:
I need to buy a few tubing fittings similar to those shown in this photo, but my search for them is
considerably hampered by not knowing what they're called. Any help would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one tube and the side of
another, by attaching with a screw.
Radius tube connectors here
http://www.componentforce.com/catego...tube-connector

http://www.essentracomponents.co.uk/...ube-connectors

http://www.panozzosrl.com/plastic_fi... 4&idFamily=13

David Billington posted for all of us...

And I know how to SNIP


On 09/08/14 16:57, Doug Miller wrote:
I need to buy a few tubing fittings similar to those shown in this photo, but my search for them is
considerably hampered by not knowing what they're called. Any help would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one tube and the side of
another, by attaching with a screw.
Radius tube connectors here
http://www.componentforce.com/catego...tube-connector

http://www.essentracomponents.co.uk/...ube-connectors

http://www.panozzosrl.com/plastic_fi... 4&idFamily=13

Good sites for the OP to buy! Maybe get a free sample...

--
Tekkie

=?iso-8859-15?Q?Tekkie=AE?= wrote in
:

David Billington posted for all of us...

And I know how to SNIP


On 09/08/14 16:57, Doug Miller wrote:
I need to buy a few tubing fittings similar to those shown in
this photo, but my search for them is considerably hampered
by not knowing what they're called. Any help would be
appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end
of one tube and the side of another, by attaching with a
screw.
Radius tube connectors here
http://www.componentforce.com/catego...tube-connector

http://www.essentracomponents.co.uk/...ube-connectors

http://www.panozzosrl.com/plastic_fi...niture/plastic
_fittings_for_furniture_p.asp?idCategory=344&idFam ily=13

Good sites for the OP to buy! Maybe get a free sample...

I wound up making my own -- no local sources, and I needed them
faster than I could get them shipped in. Not to mention cheaper
and more fun.

Thanks for all the replies, though.

Doug Miller wrote in
:

I need to buy a few tubing fittings similar to those shown in this
photo, but my search for them is considerably hampered by not knowing
what they're called. Any help would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one
tube and the side of another, by attaching with a screw.

"radius tube connectors"


--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL

Ian Malcolm wrote in
:

Doug Miller wrote in
:

I need to buy a few tubing fittings similar to those shown in this
photo, but my search for them is considerably hampered by not knowing
what they're called. Any help would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one
tube and the side of another, by attaching with a screw.

"radius tube connectors"

Thanks to all who replied. I think this will put me on the right track.

Yes, I could get them from the manufacturer of the parts in the photo, but I need them sooner
than I'm likely to get them that way. If I can't find a local source, I need to make my own.

Fence-post fittings are too large; the tubing in the photo is 7/8" OD.

"Doug Miller" wrote in message ...
Ian Malcolm wrote in
:

Doug Miller wrote in
:

I need to buy a few tubing fittings similar to those shown in this
photo, but my search for them is considerably hampered by not knowing
what they're called. Any help would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one
tube and the side of another, by attaching with a screw.

"radius tube connectors"

Thanks to all who replied. I think this will put me on the right track.

Yes, I could get them from the manufacturer of the parts in the photo, but I need them sooner
than I'm likely to get them that way. If I can't find a local source, I need to make my own.

Fence-post fittings are too large; the tubing in the photo is 7/8" OD.

Looks like pretty thin wall. Maybe force a 7/8 OD wooden dowel into it?

"Guv Bob" wrote in news:NO-
:

"Doug Miller" wrote in message
...

[...]
the tubing in the photo is 7/8" OD.

Looks like pretty thin wall. Maybe force a 7/8 OD wooden dowel into it?

Force a 7/8 OD wooden dowel inside a 7/8 OD aluminum tube?

Yes, the wall is pretty thin, but it's not zero. Somehow, I don't think that's going to work very well.

On 8/12/2014 9:08 AM, Doug Miller wrote:
"Guv Bob" wrote in news:NO-
:

"Doug Miller" wrote in message
...

[...]
the tubing in the photo is 7/8" OD.

Looks like pretty thin wall. Maybe force a 7/8 OD wooden dowel into it?

Force a 7/8 OD wooden dowel inside a 7/8 OD aluminum tube?

Yes, the wall is pretty thin, but it's not zero. Somehow, I don't think that's going to work very well.

Heating the aluminum tube might expand it more than the thickness of the
metal. If so a hot tube might swallow a dowel and cool skin tight.

Martin

On Sat, 9 Aug 2014 15:57:52 +0000 (UTC), Doug Miller
wrote:

I need to buy a few tubing fittings similar to those shown in this photo, but my search for them is
considerably hampered by not knowing what they're called. Any help would be appreciated.

http://milmac.com/images/TubingFittings.png

The purpose is to make a temporary butt joint between the end of one tube and the side of
another, by attaching with a screw.


Best I can do is "Sweepolet".

--
croy